The Dextre robot in NASA's predecessor Robotic Refueling Mission transfers and installs the tools module onto its permanent home on the International Space Station. (Source: NASA)
In November of 2009 I underwent prostate cancer surgery. The DaVinci robot was the instrument used to perform the surgery.
More than two years later I feel great and without a trace of cancer. I suspect if the robot is nimble enough to perform prostate surgery, satellites in need of repair shouldn't have much to worry about.
BuzzBodhi, I remember those days, too. But it's been awhile, and now there's a lot more funding for medical research, plus way more OTS technology software and hardware platforms. I agree, this looks like a circling back of technology development.
That's an interesting comment, vimalkumarp. I agree about the need to better link different different knowledge domains. But I think it's been awhile, at least in the US, since mil-aero was the source domain for new electronics tech, although that may have shifted in the last few years. For some time now, since the rise of the consumer sector, it seems like most of the technology platforms have come from there, since that's where most of the R&D dollars were going. Perhaps this has been different in the area of robotics.
Normal trend is to use the high technology developed for space application for solving common man's problems. Here the role reversal which clearly shows the importance of linking different domains of knowledge.
naperlou, thanks for weighing in on satellite costs. That's about what I thought. Although the webpage that describes NASA's Satellite Servicing Capabilities Office's Notional Robotic Servicing Mission, which my story discusses, does imply that satellites cost a lot, no dollar amounts are given. You've got a good point about latency. That, and other things, made me wonder just how much can really be tested here on terra firma for remotely operating robots in space. Of course, this is at the very beginning of the research project and was simply an initial demo, so we don't know what's planned for later in the process. I agree it's not a done deal.
Ann, the cost of those satellites is enormous. Frankly, the sending of a human mission may still be worth it, if the government could bet its programs back together.
I worked on some of the satelites that are in low earth orbit as well as geosync. A price tag of $1.5B for a single satelite is not undheard of. Many of these were part of a constellation.
Of course, one of the issues of the space program is funding. I worked on the Space Station Program for a large aerospace contractor in the mid 1980s. I worked with people who had worked on it ten years priior. It was finally launched at least ten years after I worked on it. Believe me, there was not that much change in between in the design.
There is an issue with servicing a satelite in geosync orbit that, from the article, is not fully resolved. That is one communications engineers run into with satellites, namely latency. The distances over which the robots would be operated require an approach different from that used in terrestial systems.
The concept at the time I worked on these things was to bring the geosync satellites into low earth orbit where the shuttle or space station could provide a platform to work on them using robot and human resources.
I think those are good points about difficulties caused by the need to use telemetry. However, if the machine vision is good enough to do surgery with by a remote operator, it may well be good enough to give enough feedback to the human operator on earth so that, for example, a piece of equipment in the way would be relatively simple for the robot to negotiate. It's also poissible, if not likely, that the equipment needing reapir is or will be designed with all that in mind.
UK-based Plastic Logic and French company ISORG have created what the pair tout as a first in flexible printed electronics: a large area, conformable, organic image sensor printed on plastic.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
