I think this would be a tremendous tool for safety devices in a press room and/or machine shops. Too often, in a punch press, ram and crank position is sensed by micro switches that can and do occasionally fail. Since OSHA, there are usually redundant safeties, but even now there are occasional failures.
@taimoortariq: The resolution of the LDC1000 output is 16 bits for eddy current losses, and 24 bits for inductance. However, the resolution as related to the customer measurement (e.g., distance or angle) will depend on the design and geometries of the end-system.
Using wireless chips and accessories, engineers can now extract data from the unlikeliest of places -- pumps, motors, bridges, conveyors, refineries, cooling towers, parking garages, down-hole drills and just about anything else that can benefit from monitoring.
With strong marketplace demand for qualified engineers across the board that currently outstrips the available supply, there may never be a better time for engineers and project managers to advance their careers and salaries. Whether those moves are successful in the short-term and long-term is likely to depend on how the transition from one job to the next is handled.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.