Improving Machine Processes & Plant Automation

Page 1 / 3 Next >
View Comments: Threaded|Newest First|Oldest First
Nancy Golden
User Rank
Interesting Concepts
Nancy Golden   6/18/2013 12:03:16 PM
While I found the concepts introduced in this article very interesting, I struggled throughout as well. By placing the enineering burden from three major disciplines on one person without the benefit of additional perspectives that come from having a team is not a direction that I would normally pursue. Most folks recognize the value of interacting with their colleagues that specialize in other areas. Whenever I would build a test set, building a test fixture was a very important part of the design. Having very limited mechanical engineering ability, I consulted with the guys that had that expertise...and through our collaboration an effective test fixture design would emerge. I would respectfully disagree with the scenario of a very unintelligent design that did not work well because it was built by three different engineers with differing fields of expertise.

It seems to me that in order to educate a mechatronics engineer would also take an even more intensive education with a much more expanded degree plan - something a lot of folks would not be able to afford time-wise or financially - but if they didn't get a good education they would be a "jack of all trades and master of none" which might do well for home projects but not for industry.

Interesting concepts - just not sure I agree...

Partner Zone
Latest Analysis
Remote monitoring now looks beyond the individual motor or conveyor and instead views the process from end to end.
BASF is partnering with Hyundai on a high-performance concept car that showcases both eco-friendly, sustainable materials and materials to enable lighter weight cars.
In an move to ease the use of multiple product design tools, PLM provider Aras and EDM company Zuken have integrated their products.
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service