I understand that, but did the cell fail from being overheated, or did it become hot because it had failed? The folks at Tesla and others have said that this type of pack requires active cooling. If that's true will an overheated cell fail by shorting, or was the cell poorly constructed, shorted and then caused the thermal runaway?
the cell presented is not the one from 787 but the technology should be similar.
The 787 battery pack has 8 cells serial hard connected. The cells can not be individual switched off in case of failure. The damaged cell still getting power from the good cells and aggravate the issue.
The classic question. Was it a manufacturing problem in the battery pack that caused the cell to short or did the pack overheat and then a cell failed, as so many people looking from the outside have suggested?
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.