HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
News
Electronics & Test

Were the Boeing 787 Batteries Cooled Properly?

NO RATINGS
Page 1 / 2 Next >
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 6/6
ScotCan
User Rank
Platinum
Re: Design Decisions
ScotCan   1/28/2013 9:43:13 AM
We're working at the grass roots level with lithium systems in E-Scooters and we're having our problems although not quite as dramatic as Boeings. The battery management system does what it's supposed to do where temperature increases beyond a certain level opens the circuits...somewhat inconveniently after about 3 blocks of hard acceleration. Troubleshooting indicates that by disconnecting the battery, pausing, then reconnecting resets the system, and as long as a reasonable acceleration is the input the system works continuously. As soon as a higher torque (hence amperage increase) is applied to the drive system over a certain length of time the system cuts out. Our solution to this irritation is in work consisting of a hybrid battery system using lead acid for acceleration and lithium for cruise, the controller being rigged to accomodate the changes. Boeing's solution may be the same in the long run...cooling systems are just another aggravation, but hybrid battery systems rigged through a reliable controller may be slightly heavier but likely not as heavy as a cooling system and have the advantage of no dead weight (all batteries being functional)

 

Battar
User Rank
Platinum
Re: Cooling System
Battar   1/28/2013 9:37:09 AM
NO RATINGS
Not so puzzling. Before you design in a cooling system, you ask how high can you go without it. For example, if a transistor is rated with a junction temperature of 150 degrees, I would let it heat up to 100 degrees before I put a fan in. Thats a 33% margin. Cooling at sea-level is not the same as cooling at 8000ft equivalent alitude in a pressuized airliner, though.

YJ77
User Rank
Silver
Re: Design Decisions
YJ77   1/28/2013 9:37:06 AM
Boeing will suffer politically, regardless of the decisions they make now.  Their best option is to have a replacement strategy defined and a timeline for implementation & FAA approval before the end of this week.  Any more delay will cripple their Dreamliner, giving the A380 a huge advantage. 

Ken E.
User Rank
Gold
Cooling 'built in'?
Ken E.   1/28/2013 9:32:06 AM
It's possible the cooling was 'built-in', i.e. the design current draw and subsiquent heat load was lower than the thermal capacity of the unit as installed. That's how zillions of the small and ubiquitous lithium batteries consumers use every day work.  It'll be interesting to see how this story plays out.  Certainly some mistake was made somewhere, but we seem to be jumping to conclusions

Greg M. Jung
User Rank
Platinum
Re: Design Decisions
Greg M. Jung   1/27/2013 11:48:44 AM
NO RATINGS
Good point William.  I wonder if the energy density of the lithium-ion battery system with an additional cooling system would now be less-favorable than the energy density of the traditional/proven battery technology (without the additonal cooling system).

williamlweaver
User Rank
Platinum
Design Decisions
williamlweaver   1/26/2013 8:57:06 AM
NO RATINGS
Chuck, do you get a sense that perhaps Boeing moved to the cobalt oxide cathode lithium-ion batteries to shed weight and then made a decision to not include a cooling system that would have added net weight? It is feasible that this type of failure is only found after the 787 is used in process and not in testing and that Boeing can find a safe fix. Gosh, I sure hope that it does not turn out to be known, debated cost-saving management decision that turns political...

Nancy Golden
User Rank
Platinum
Cooling System
Nancy Golden   1/25/2013 7:34:07 PM
NO RATINGS
The lack of a cooling system would be very puzzling. According to a friend of mine who is a battery guy, lithium ion batteries are the highest energy density and are one of the most volatile chemistries, so correct charging and cooling are of paramount importance.

<<  <  Page 6/6
Partner Zone
Latest Analysis
A Frost & Sullivan study finds that increased cyber attacks are prompting a flurry of innovative protection tools.
Devices and interconnected systems are finding a foothold not only in our homes but in mainstream organizations. Here are three tips to mitigate the risk.
What makes this movie stand out from the typical high school sports story is that the teenagers are undocumented immigrants, and the big game is a NASA-sponsored marine robotics competition. Like many other Hollywood movies, however, Spare Parts only tells part of the story. What the film shows -- and doesn’t show -- raises important issues affecting STEM education in the US.
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Load dump occurs when a discharged battery is disconnected while the alternator is generating current and other loads remain on the alternator circuit. If left alone, the electrical spikes and transients will be transmitted along the power line, leading to malfunctions in individual electronics/sensors or permanent damage to the vehicle’s electronic system. Bottom line: An uncontrolled load dump threatens the overall safety and reliability of the vehicle.
More:Blogs|News
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service