HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
News
Electronics & Test

Were the Boeing 787 Batteries Cooled Properly?

NO RATINGS
Page 1 / 2 Next >
View Comments: Oldest First|Newest First|Threaded View
Page 1/6  >  >>
Nancy Golden
User Rank
Platinum
Cooling System
Nancy Golden   1/25/2013 7:34:07 PM
NO RATINGS
The lack of a cooling system would be very puzzling. According to a friend of mine who is a battery guy, lithium ion batteries are the highest energy density and are one of the most volatile chemistries, so correct charging and cooling are of paramount importance.

williamlweaver
User Rank
Platinum
Design Decisions
williamlweaver   1/26/2013 8:57:06 AM
NO RATINGS
Chuck, do you get a sense that perhaps Boeing moved to the cobalt oxide cathode lithium-ion batteries to shed weight and then made a decision to not include a cooling system that would have added net weight? It is feasible that this type of failure is only found after the 787 is used in process and not in testing and that Boeing can find a safe fix. Gosh, I sure hope that it does not turn out to be known, debated cost-saving management decision that turns political...

Greg M. Jung
User Rank
Platinum
Re: Design Decisions
Greg M. Jung   1/27/2013 11:48:44 AM
NO RATINGS
Good point William.  I wonder if the energy density of the lithium-ion battery system with an additional cooling system would now be less-favorable than the energy density of the traditional/proven battery technology (without the additonal cooling system).

Ken E.
User Rank
Gold
Cooling 'built in'?
Ken E.   1/28/2013 9:32:06 AM
It's possible the cooling was 'built-in', i.e. the design current draw and subsiquent heat load was lower than the thermal capacity of the unit as installed. That's how zillions of the small and ubiquitous lithium batteries consumers use every day work.  It'll be interesting to see how this story plays out.  Certainly some mistake was made somewhere, but we seem to be jumping to conclusions

YJ77
User Rank
Silver
Re: Design Decisions
YJ77   1/28/2013 9:37:06 AM
Boeing will suffer politically, regardless of the decisions they make now.  Their best option is to have a replacement strategy defined and a timeline for implementation & FAA approval before the end of this week.  Any more delay will cripple their Dreamliner, giving the A380 a huge advantage. 

Battar
User Rank
Platinum
Re: Cooling System
Battar   1/28/2013 9:37:09 AM
NO RATINGS
Not so puzzling. Before you design in a cooling system, you ask how high can you go without it. For example, if a transistor is rated with a junction temperature of 150 degrees, I would let it heat up to 100 degrees before I put a fan in. Thats a 33% margin. Cooling at sea-level is not the same as cooling at 8000ft equivalent alitude in a pressuized airliner, though.

ScotCan
User Rank
Platinum
Re: Design Decisions
ScotCan   1/28/2013 9:43:13 AM
We're working at the grass roots level with lithium systems in E-Scooters and we're having our problems although not quite as dramatic as Boeings. The battery management system does what it's supposed to do where temperature increases beyond a certain level opens the circuits...somewhat inconveniently after about 3 blocks of hard acceleration. Troubleshooting indicates that by disconnecting the battery, pausing, then reconnecting resets the system, and as long as a reasonable acceleration is the input the system works continuously. As soon as a higher torque (hence amperage increase) is applied to the drive system over a certain length of time the system cuts out. Our solution to this irritation is in work consisting of a hybrid battery system using lead acid for acceleration and lithium for cruise, the controller being rigged to accomodate the changes. Boeing's solution may be the same in the long run...cooling systems are just another aggravation, but hybrid battery systems rigged through a reliable controller may be slightly heavier but likely not as heavy as a cooling system and have the advantage of no dead weight (all batteries being functional)

 

ChasChas
User Rank
Platinum
Re: Design Decisions
ChasChas   1/28/2013 9:49:51 AM
Since we are all in the guessing mode, I'll guess too.

The weight savings was a big temptation so they calculated the risks and made a decision to go with this battery.

The surprise came in real life when the battery ended up working much harder than anticipated. Accessories?, add-ons?, custom build? (Sales says yes, yes, yes, and the original engineer isn't even in the picture.)

l_jhanson
User Rank
Silver
Re: Cooling 'built in'?
l_jhanson   1/28/2013 9:52:10 AM
The division I worked for several years ago had a similar Lithium-ion battery 'thermal event' on a much smaller scale in a consumer market portable radio... We did not experience any fire, but there certainly was sufficient energy released to create a lot of smoke and reduce the radio to a bubbling mass of melted plastic. The cause seemed to be a short resulting from insulating materials being capable of sliding with vibration... The entire experience was perplexing...the experts were telling us it couldn't happen, yet it was!

Toaster
User Rank
Silver
Re: Design Decisions
Toaster   1/28/2013 10:37:08 AM
I was a Boeing Engineer for a while and I worked on the 767 and 777 projects. I know something about Boeing. Yes, weight savings is very important. BUT SAFETY is the highest priority. So high, in fact that no technology is used that has not been thoroughly tested and confirmed to be safe. I really don't understand why this is happening, (and I will not guess, as I am an ME) we will find out eventually. Oh and yes, "The original Engineer isn't even in the picture" is somewhat true. Once an engineering design is completed by "The original Engineer" The design is circulated through all the engineering departments for their blessing, and modification (if any) before it is allowed to be installed in an airplane.  The design may or may not look like the original after everyone has gotten their hands on it.

 

Page 1/6  >  >>
Partner Zone
Latest Analysis
Some cars are more reliable than others, but even the vehicles at the bottom of this year’s Consumer Reports reliability survey are vastly better than those of 20 years ago in the key areas of powertrain and hardware, experts said this week.
While risk management sounds like one activity, in order to be conducted effectively, it must be broken down into three sub-components: risk assessment, risk monitoring, and response planning.
Many of the materials in this slideshow are resins or elastomers, plus reinforced materials, styrenics, and PLA masterbatches. Applications range from automotive and aerospace to industrial, consumer electronics and wearables, consumer goods, medical and healthcare, as well as sporting goods, and materials for protecting food and beverages.
In a speech at China's National People’s Congress in Beijing this month, Premier Li Keqiang laid out plans to revamp the country's manufacturing infrastructure with advanced technology.
While many larger companies are still reluctant to rely on wireless networks to transmit important information in industrial settings, there is an increasing acceptance rate of the newer, more robust wireless options that are now available.
More:Blogs|News
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service