HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Feature
Materials & Assembly

Device Manufacturers Embrace Electrically Conductive Adhesives

NO RATINGS
1 saves
Page 1 / 3 Next >
View Comments: Threaded|Newest First|Oldest First
William K.
User Rank
Platinum
Electrically conductive adhesives.
William K.   4/9/2013 11:29:36 AM
NO RATINGS
It is clear that stable electrically conductive adhesives can be of great value in quite a few applications. So the usefulness potential is quite high.

Mant years ago I had an experience with anelectrically conductive adhesive material that I used to assemble a switch. The problem was that I did not realize that the material was conductive at all. The result was that while the assembly was fine mechanically, the switch was always "on", which caused me quite a bit of puzzelment, since it was clear that the contacts were opening as desired. The end result was that I had to use a different switch and a mechanical means of attachment. But it was certainly an educational experience.

notarboca
User Rank
Gold
Re: Electrically conductive adhesives.
notarboca   4/29/2013 9:32:40 PM
NO RATINGS
This should be quite handy in electrically connecting components in situations too tight for a wire or traditional connector.

William K.
User Rank
Platinum
Re: Electrically conductive adhesives.
William K.   4/29/2013 10:11:57 PM
NO RATINGS
I do see a serious potential for use with surface mount components, particularly the very small ones with sizes under one mm. Those parts are a big challenge to work with by hand, which makes prototyping quite a challenge. A conductive adhesive could provide some help.

Greg M. Jung
User Rank
Platinum
Chemical Resistance
Greg M. Jung   4/11/2013 9:47:03 PM
NO RATINGS
Well researched article. I am assuming that the silicone in the adhesive can also help increase inadvertent exposure to chemicals and possibly have good chemical resistance.

JimT@Future-Product-Innovations
User Rank
Blogger
Hard Lesson Leaarned
JimT@Future-Product-Innovations   5/9/2013 6:36:05 PM
NO RATINGS
Looking back over archived stories, I had missed this one, now over a month old. I have several past product experiences using various conductive adhesives, and I had learned a very valuable lesson a few years ago. 

Without going into specifics, I can tell you I had designed myself into a corner, and needed to get an electrical component connected to the main circuit. Based on its unique mounting condition, a conductive adhesive was the obvious answer.  I simply plowed forward with the mounting method and the adhesive, and had first parts prototyped.

 When the component didn't function properly, I learned the current required for the component far exceeded the current capability of the conductive particles in the adhesive.  There was no way the adhesive as ever going to drive the component properly, and I was stuck.

This bad assumption kicked me back significantly, and I had to undergo a substantial redesign.  That's one lesson I'll never forget.

Partner Zone
Latest Analysis
We shared our list, now Design News readers tell us which artificial intelligence movies they watch again and again.
Researchers have been working on a number of alternative chemistries to lithium-ion for next-gen batteries, silicon-air among them. However, while the technology has been viewed as promising and cost-effective, to date researchers haven’t managed to develop a battery of this chemistry with a viable running time -- until now.
Norway-based additive manufacturing company Norsk Titanium is building what it says is the first industrial-scale 3D printing plant in the world for making aerospace-grade metal components. The New York state plant will produce 400 metric tons each year of aerospace-grade, structural titanium parts.
Researchers have simplified the fabrication of the geometric requirements for fluid motion in microrobots for in vivo medical applications.
The National Aeronautics and Space Administration’s recently announced plan to put an electric airplane in the air by 2018 is forward-looking, but hardly unique.
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 11 - 15, Embedded System Design Techniques™ - Debugging Real-time Embedded Software – Hands on
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service