HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Feature
Materials & Assembly

Device Manufacturers Embrace Electrically Conductive Adhesives

NO RATINGS
1 saves
Page 1 / 3 Next >
View Comments: Newest First|Oldest First|Threaded View
JimT@Future-Product-Innovations
User Rank
Blogger
Hard Lesson Leaarned
JimT@Future-Product-Innovations   5/9/2013 6:36:05 PM
NO RATINGS
Looking back over archived stories, I had missed this one, now over a month old. I have several past product experiences using various conductive adhesives, and I had learned a very valuable lesson a few years ago. 

Without going into specifics, I can tell you I had designed myself into a corner, and needed to get an electrical component connected to the main circuit. Based on its unique mounting condition, a conductive adhesive was the obvious answer.  I simply plowed forward with the mounting method and the adhesive, and had first parts prototyped.

 When the component didn't function properly, I learned the current required for the component far exceeded the current capability of the conductive particles in the adhesive.  There was no way the adhesive as ever going to drive the component properly, and I was stuck.

This bad assumption kicked me back significantly, and I had to undergo a substantial redesign.  That's one lesson I'll never forget.

William K.
User Rank
Platinum
Re: Electrically conductive adhesives.
William K.   4/29/2013 10:11:57 PM
NO RATINGS
I do see a serious potential for use with surface mount components, particularly the very small ones with sizes under one mm. Those parts are a big challenge to work with by hand, which makes prototyping quite a challenge. A conductive adhesive could provide some help.

notarboca
User Rank
Gold
Re: Electrically conductive adhesives.
notarboca   4/29/2013 9:32:40 PM
NO RATINGS
This should be quite handy in electrically connecting components in situations too tight for a wire or traditional connector.

Greg M. Jung
User Rank
Platinum
Chemical Resistance
Greg M. Jung   4/11/2013 9:47:03 PM
NO RATINGS
Well researched article. I am assuming that the silicone in the adhesive can also help increase inadvertent exposure to chemicals and possibly have good chemical resistance.

William K.
User Rank
Platinum
Electrically conductive adhesives.
William K.   4/9/2013 11:29:36 AM
NO RATINGS
It is clear that stable electrically conductive adhesives can be of great value in quite a few applications. So the usefulness potential is quite high.

Mant years ago I had an experience with anelectrically conductive adhesive material that I used to assemble a switch. The problem was that I did not realize that the material was conductive at all. The result was that while the assembly was fine mechanically, the switch was always "on", which caused me quite a bit of puzzelment, since it was clear that the contacts were opening as desired. The end result was that I had to use a different switch and a mechanical means of attachment. But it was certainly an educational experience.

Partner Zone
Latest Analysis
Halloween isn’t just a time for creative costumes. Thanks to the element14 online design community, the holiday this year also brings us a number of creative electronic device design ideas aimed at making your Halloween party a unique experience.
The Arduino is great for connecting with hardware but has a limited user interface. Apple’s iOS devices have a great user interface but are limited when connecting with hardware.
After a year or so of missteps, false starts, retractions, and postponements, inkjet office printer giant Hewlett-Packard has finally revealed just what it plans to do in 3D printing.
On April 15, 2010, President Barack Obama gave a major speech at the Kennedy Space Center in Florida, announcing that the US would send astronauts to Mars by the mid-2030s. But in order to do so, NASA would first need to ramp up its capabilities through missions directed toward "a series of increasingly demanding targets," i.e. asteroids.
Selfies have already ruined your nights out and your social media feeds. Now they're after your breakfast.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Nov 3 - 7, Engineering Principles behind Advanced User Interface Technologies
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service