Dow Chemical and Canadian company Klean Industries are collaborating to build waste recovery facilities throughout North America for recovering energy, chemicals, and oil from nonrecycled plastics. The agreement especially targets used plastic packaging materials.
The two companies' three-year letter of intent covers the combination of their resources and proprietary technologies to convert end-of-life mixed plastics into useful products. Klean's advanced thermal conversion technology is used in the world's largest plastics-to-oil recycling plant in Japan. The Japanese plant, which processes 50 metric tons (55.12 US tons) per day, "is the only technology we have seen that has consistently operated for over a decade on a commercial scale," said Jeff Wooster, Dow's global sustainability leader, performance plastics, in a press release.
Dow Chemical and Klean Industries are collaborating to build waste recovery facilities throughout North America for recovering energy, chemicals, and oil from nonrecycled waste plastics, using gasification systems such as this one. (Source: Klean Industries)
The plant that Dow visited in Japan can process mixed plastics, including PET and PVC, as well as the more common polyethylene, polypropylene, and polystyrene. Klean, a manufacturer of pyrolysis and gasification plants and equipment, specializes in systems that use plastic and used tires as feedstocks to produce fuel. Depending on the plastic, Klean says it's possible to recover approximately 950 liters (250.9 gallons) of oil from each metric ton of mixed plastic waste.
In the waste recovery facilities planned under the agreement with Dow, Klean will be using "our integrated gasification system, which will produce two primary products: an ultra-low sulphur diesel fuel, and green electricity that will be export to the grid," said a company spokesman in an email to Design News.
Gasification uses pressure, steam, and heat to convert plastic waste and other materials, both liquid and solid, into a syngas as the primary energy product, not the flue gas that results from incineration. Syngas, when mixed with air, can be used with minimal modifications to gasoline or diesel engines. In contrast to pyrolysis and most commercial gasification processes, which don't use oxygen, Klean's gasification process uses a small amount of air to produce partial combustion of a small amount of the feedstock. The oxygen optimizes the yield of syngas by assisting the breakdown of the waste's heavy organic compounds. Klean's process also differs from other commercial gasification in operating temperature, internal/external heating ratio, and reactor design.
Klean's processes convert oil-based waste streams, including end-of-life plastics, into high-grade liquid fuels, syngas, electricity, and nano-scale carbon black fillers. The company's customers include energy utilities, waste management companies, manufacturing businesses, and government bodies in North America and Europe. The company was profiled in the ground-breaking American Chemistry Council-sponsored study, "Conversion technology: A complement to plastic recycling."
Dow has previously conducted pilot tests to make energy from recycled linear low-density polyethylene (LLDPE) scrap film generated in one of the company's extrusion laboratories. The tests resulted in recovering 96 percent of the available energy after incinerating 578 lb of used plastic in a kiln at one of Dow's waste treatment facilities. The recovered energy, equivalent to 11.1 million BTUs of natural gas, was used as fuel to power Dow's incinerator while conducting the pilot test. One of the stated long-term goals of Dow Performance Plastics' business is to recycle 100 percent of its used packaging.
Hey, I wasn't either--the bridge, in particular, blew the minds of all of us staff and the readers, with few exceptions. That one was a real motivator to me to find other leading-edge technologies in recycled plastics.
This is a very interesting development. However, the process description is a little difficult to follow. (This may be because Klean Industry's processes are proprietary).
The article says "most commercial gasification processes [...] don't use oxygen." I don't know much about gasification of plastic waste, but coal gasification definitely does use oxygen. Gasification essentially means reacting carbon (coal -- or, presumably, pyrolized plastic waste) with oxygen and steam, to produce a mixture of carbon monoxide and hydrogen (syngas).
I'm also not quite sure what to make of the statement that "syngas, when mixed with air, can be used with minimal modifications to gasoline or diesel engines." Syngas, as the name implies, is a gas, not a liquid. I think it would take more than just minimal modifications to make an engine (designed to run on liquid fuel) capable of running on a gaseous fuel.
It's possible to produce liquid hydrocarbons from syngas by the Fischer-Tropsch process. Maybe this is what is being referred to, but it involves a lot more than just mixing syngas with air.
Anyway, it's interesting that Dow is investing in this technology, and it will be interesting to see how environmentalists react. I suspect they will be skeptical, since they have opposed waste-to-energy plants in the past. Still, in my opinion, anything that minimizes waste is a good thing.
Wow, great, I didn't know that! See, even someone as informed as me about this isn't aware of what is happening in the plastic world...I still think finding alternatives to plastic is the way forward, but all of these recyclable and reuseable options for the plastic already out there are good ones for sure.
Elizabeth, plastic can also be upcycled--it's not easy to do but a few companies, including SABIC, have figured that out: http://www.designnews.com/author.asp?section_id=1392&doc_id=242634&image_number=9 Then there's the recycled bottles that get upcycled into weight-bearing bridge beams: http://www.designnews.com/author.asp?section_id=1392&doc_id=237384
Tim, the short answers are "it depends, but they're dealt with" and "Yes." Longer answers to your questions would require a few more articles: check out the links given in this article to the ACC-sponsored study, and to this DN story: http://www.designnews.com/author.asp?section_id=1392&doc_id=242808 as well as "Related posts" at the end of this article.
Great to see a common-sense and economically proven solution in the area of plastic recycling. Hope that companies who invest in this are also given tax incentives to make it a more attractive investment.
I am really happy to see this kind of effort happening and the reality of true plastic recovery facilities. Most people don't realize that plastic can only be recycled once and then downcycled...but that it ultimately ends up in a landfill or in the ocean. I am a surfer, so I see the result of the latter on beaches and in the sea all the time. It also ends up choking marine life, which eat plastic bags or rings and end up dying as a result. It is really an important step for a big company like Dow to do something to help not only mitigate the plastic problem but also turn it into something truly reuseable and beneficial. Thanks for covering this, Ann. I will keep my eye on this space.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
