In an effort to make streets safer for pedestrians, the National Highway Traffic Administration (NHTSA) has proposed a rule that could require engineers to add more sound to hybrids and electric vehicles (EVs).
The proposed rule, a follow-on to the Pedestrian Safety Enhancement Act of 2010, would likely require that automakers add external speakers to hybrids and EVs. NHTSA estimates that such speaker systems would add about $30 to the manufacturing cost of the cars, but could prevent about 2,800 injuries over the life of each vehicle model year.
"Our proposal would allow manufacturers the flexibility to design different sounds for different makes and models while still providing an opportunity for pedestrians, bicyclists, and the visually impaired to detect and recognize a vehicle and make a decision about whether it's safe to cross the street," NHTSA administrator David Strickland said in a press release.
Toyota's Prius uses a Vehicle Proximity Notification System under the hood that emits additional engine-like noises below 15mph. (Source: Toyota)
The mandate is the result of numerous studies over the past five years that have shown that the incidence of pedestrian crashes is higher among hybrids and electric cars. A 2009 study from NHTSA conducted on 8,287 hybrids and 559,703 conventional vehicles showed that hybrids were "two times more likely to be involved in a pedestrian crash." Similarly, a study done in Japan at the request of the Japanese Federation of the Blind revealed that more than half the blind respondents were "terrified" of hybrids.
NHTSA's mandate would provide leeway for automakers as to the kinds of sounds, but it does call for them to be detectable under a wide range of street noises and ambient background sounds.
Some hybrids and EVs already incorporate mechanisms for additional sound. Toyota's Prius and RAV EV vehicles, for example, employ a Vehicle Proximity Notification System (VPNS), which is located under the hood and emits sounds at speeds under 15mph. VPNS includes low- and high-frequency sounds that mimic Toyota's internal combustion engines. "It's a retrofitted little speaker behind the front grille," Jana Hartline of Toyota told Design News. "It's not anything that can be heard inside the car, but it is distinctive."
NHTSA said it will give the public 60 days to comment on the proposed mandate. Automakers are expected to work with the agency on the development of a standard. "We've studied it on our own and we will continue to work with NHTSA on it," Hartline said.
Hoof Beats? Really? At 15 MPH or less? If Mercedes-Benz can make sensors that allow a vehicle to stop short of a vehicle stopped or to maintain distance during cruising, why can't the same sensor array be used to flash headlights or the audible double honk warning prior to the vehicle stopping on it's own. For that matter, how about day/night vision that compares digitally comparative movement from outside of the planned vehicle path based upon steering position. Making noise to prevent accidents is like putting playing cards into the spokes of my bicycle, it might keep those with hearing out of the way, but what about grandma or the late night pub crawler?
Thanks Ann. Actually, I was not kidding. :) I think it would improve the acoustic background of most places, especially Manhattan, where the background is "siren".
I can certainly understand the need for this. I have an issue with hearing and EVs, depending upon the model, are almost "nonexistant" when unseen. In the work I do on a daily basis; i.e. gas combustion, its'a know fact that natural gas is oderless so, an oderant is added for detection. Very same principal as Charles has mentioned. The automakers are definitely following the logical path, even if my mandate.
Endlessly playing the instrumental version of the classic "Spanish Fly."
All joking aside, I think this is a good idea. If only to protect the blind and telling the driver their car is actually on. Sometimes EVs sound like they are off at stoplights.
Believe it or not, oldpartsnrust, there was a movie called "The Dilemma" with Vince Vaughn where the main characters do the very thing you've described. They develop a way to make an electric car sound exactly like an old-fashioned muscle car.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
