Chuck, there seems to be an explosion of 3D for prototyping. I would think that low prodcution rate parts could be made with 3D printing as well. Of course, for high volume production, injection molding is much faster. And once the mold is made, it is relatively cheap.
One thing, though. You mention parts such as brake disks. Are these usable as real brakes, or are they just used to test fit and manufacturability.
Some of the most impressive gains are being made in 3D printing. I think this is the space to watch this year. This way of prototyping could revolutionize the auto industry and allow manufacturers to bang things out much more efficiently and cost effectively. Will be interesting to see how this evolves and is adopted by other automakers.
Elizabeth M, I agree. This year will be exciting to see all of the innovative products being created using 3D printers. Every Thursday, Adafruit posts blogs regarding the state of 3D printing. Here's the link.https://www.adafruit.com/blog/?s=3D+printing
Chuck, this is great news, although I'm not familiar with the term "surrogate" in 3D printing/AM. I have basically the same question as Lou: are the parts for form and fit only, or are they also functional? And another question: if some of them arfe functional, is this for prototyping or low-end production volumes? Including SLA says prototypes, but LS could be used for production parts.
These parts are truly functional, so they can be used in prototype testing applications. The main reason they don't make it to production is that these techniques wouldn't be practical for huge volumes. In production, automakers can build hundreds of parts per hour. So while it may take weeks to build the production tooling, they get that time back when the tooling is completed and they move to large-scale production. In contrast, the methods mentioned in this article can take hours per part, so while that works for small lots, it doesn't work for volumes in the tens of thousands. In that sense, building a car is a lot different than building a 787. Automotive production volumes are just too big for this technology.
mrdon, thanks for that link. In commenting on an earlier post last year, I expressed the idea that 3D printing could be used for scanning and reproducing museum replicas of various art objects, such as sculptures. Looks like that's being done by more than one artist. Good to see my wish come true.
United Launch Alliance will fly 3D-printed flight hardeware parts on its rockets starting next year with the Atlas V. The company's Vulcan next-gen launch vehicle will have more than 100 production parts made with 3D printing. The main driver? Parts consolidation and 57% lower production costs.
The new small-form-factor EZ-BLE PRoC (Programmable Radio on Chip) module is a derivative of the existing PRoC BLE Programmable Radio-on-Chip solution. The EZ-BLE PRoC module integrates the programmability and ARM Cortex-M0 core of the PRoC BLE, two crystals, an onboard chip antenna, a metal shield, and passive components.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.