Rockwell Offers Integrated Mid-Range EtherNet/IP Motion Control
The combined Kinetix 5500 servo drive, VP low-inertia servo motor, and single-cable technology from Rockwell Automation simplifies wiring for motion-control systems of midrange machines. The integrated product should reduce design time and lower the overall application footprint for equipment engineers and machine builders, the company said. (Source: Rockwell Automation)
Great point, TJ. Certainly engineered cables need to be designed carefully and tested extensively at longer distances. If it isn't right, I'm sure Rockwell will find out about it. But that's still a legitimate concern for system engineers.
The important part of single cable servo hardware is the cable. Rockwell will need to impress experienced engineers that they've designed the cable so that the feedback signals are immune to the noisy power signals.
Obviously added EtherNet/IP to their mid-range motion control offering is the main story, but the single cable combining power and feedback might be the most unique benefit. Also covers both servos and induction motors with single platform.
Yes, it seems to be the case, you're right. Putting more functionality in one device reduces the need for multiple components, as you point out. And Ethernet/IP is becoming more prevalent in device design as it seems that everything is required to be connected to a network these days.
Elizabeth, it seems that the trend is to increase integration of these types of devices. Many in the past were made up of separate components. The use of EtherNet/IP also eases integration and cuts costs. Interesting application.
What if algae borne of fertilizer runoff that pollutes rivers and lakes could be harvested and used as biofuel feedstock? What if the leftovers could be recycled into farm soil nutrients, eliminating at least some of the need for artificial fertilizers in the first place? Western Michigan University researchers have a plan.
Manufacturers of plastic parts recognize the potential of conformal cooling to reduce molding cycle times. Problem is, conformal molds require additive manufacturing (AM), and technologies in that space are still evolving. Costs also can be high, and beyond that, many manufacturing organizations lack the knowledge and expertise needed to apply and incorporate additive technologies into their operations.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.