Tadiran Batteries' new family of long-life rechargeable lithium-ion cells, the TLI Series, is designed for use in harsh environments.
Standard rechargeable lithium-ion cells have inherent drawbacks, including short operating life (five years max), low maximum cycle life (1,000), high annual self-discharge (up to 60 percent per year), and a limited temperature range of 0C to 60C with no possibility of charging at low and high temperatures, but TLI Series batteries utilize technology found in Tadiran's patented hybrid layer capacitor (HLC).
The HLC stores the high current pulses required for two-way wireless communications. It has been field-proven in millions of cells to deliver more than 25 years of service life. TLI Series batteries modify this technology to deliver reliable, long-term performance under extreme environmental conditions.
TLI Series batteries feature:
Wider operating temperature (-40C to 85C, with storage up to 90C)
Ability to deliver high current pulses (up to 5A)
Low annual self-discharge rate (less than 5 percent)
Up to five times more life cycles (5,000 full cycles)
Longer operating life (10 years)
Charging possible at extreme temperatures (10 hour rate)
Glass-to-metal seal (where others use crimped seals that are prone to leakage)
TLI Series cells can be recharged using DC power, or they can be used in conjunction with photovoltaic solar systems or other energy-harvesting devices to deliver reliable long-term power. They are available in several standard configurations: AA-size (1,550), 1,530, and 1,520, as well as custom battery packs.
While this sounds like good stuff - I am a little confused. It seems a new line of batteries are being introduced with the claim that the technology has been proven to be reliable for 25 years in the field. The new specs look very promising but I am wondering what are the differences between the old batteries with the 25 year service life used in the meters shown on the company website and the new line that is being introduced? Are we still comparing apples to apples here?
I don't know how Tadiran does it, but they've been very successful in making low-leakage batteries that can last as long as 25 years in energy scavenging applications.
Our HLC is used in conjunction with our primary, non-rechargeable lithium cells which keeps it from being totally discharged and therefore never see 5000 cycles.
This is how it can power applications for more than 25 years.
Great to see this energy dense tech getting a push to commercialization. Most on the time, boastful battery news comes with the tag, still in development or not available any time soon. Hope to see more energy dense cells in the near future.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
