A new robot developed by the Chiba Institute of Technology's Future Robotics Technology Center (fuRO) that resembles a small military tank is set to explore Fukushima's damaged nuclear reactor.
The fuRO Sakura robot has been designed to enter the disabled Fukushima Dai-Ichi nuclear reactor buildings (especially the basement areas, where leaks of cooling water are suspected) and collect information on damage. After the March 2011 tsunami and earthquake, the Japanese government began testing several robotic technologies that will help with future accidents. As we reported this spring, the first robot to enter the plant and provide glimpses inside after the disaster was iRobot's 510 PackBot. That hand-carryable 24-pound machine can climb stairs, roll over rubble, and navigate narrow passages.
The Sakura, resembling a small tank, is designed to assess damage at the Fukushima Dai-Ichi nuclear reactor buildings, especially the basement areas. A key ability will be climbing stairs with changing slopes. (Source: Chiba Institute of Technology's Future Robotics Technology Center)
The remote-controlled Sakura is one of several rescue robots fuRO has developed during two generations of search-and-rescue robotics R&D. The Sakura is a result of a project conducted by Japan's New Energy and Industrial Technology Development Organization (NEDO) that focuses on the development of robots for disaster response, including search-and-rescue and quick damage assessment.
Another robot in this project is a modified robotic suit based on the Cyberdyne HAL (Hybrid Assistive Limb) exoskeleton originally designed to help people walk or lift heavy objects. The modified version will augment the suit's power units, sensors, and battery pack with a tungsten shielded vest that reduces radiation exposure by about 50 percent, as well as a ventilation system to prevent overheating. The suit can also monitor the wearer's vital signs, including heart rate and body temperature.
The Sakura robot can roll through narrow passageways and stairs on tank-like treads, finding its way with a camera, sensors, and a directional microphone that detects the sound of moving water. The robot protects itself and its operator against radiation. Its bottom surface is covered by a stainless steel plate 5mm thick, and one of its devices automatically extends and retracts communication cables. It's also designed to go up to three years without maintenance.
I should add that rad-hard design techniques and materials research are also a long-term subject of R&D by NASA for space applications, as well as DARPA's military apps and, presumably, various researchers for the nuclear energy industry.
Of course there has been research and development of Rad-hard materials and components, but it seems like it is not quite an ongoing process. But it may just be a topic that gets really poor coverage in the media. After all, people may start to ask as to exactly WHY do we need to develop such materials. And if the media start asking questions there may be quite a fuss made.
But my point is that different materials that may be quite desireable fr a design may not have any information available about their suitability for service in a radioactive environment. Radiation effects on one polymer may not be an adequate indication of how a different polymer would be affected.
William, rad-hard design techniques and materials research have been around a long time in the US military, including for electronic components, and much of it is usable in robotics design. Regarding this robot and how much of the technology and design it uses is new, the main thing seems to be handling those slopes and slope changes.
Elizabeth. Right you are. Wherever it is difficult or dangerous for people, our robots can step in. They are exploring Mars, the depths of the ocean even (gasp) the dust bunnies under the couch. All kidding aside, let's hope that search and rescue bots are not far behind.
I agree with you and the others, Ann, that it's great to see this kind of work being done. This is exactly the point of creating robots that can go places or perform tasks that are dangerous for humans. It's nice to see it being put to use in a real-world example, as a lot of this stuff is still in the concept phase.
I am inclined to agree that the robot in the picture does look a bit like an older tank model. I am much more wondering why it has taken so very long to come up with such a creation. It does not look like there is an "breakthrough" design features, nor any wonderful new concepts. Of course the assurance of all of the materials being able to survive the possibly intense radiation may have taken some time.
Do we know what effects radiation has on components such as rechargeable batteries? That may be a potential show stopper, since the alternative is to have the robot pay out a cable as it travels, and then some how recover the cable as it returns. That sort of feature would add weight and possibly reduce maneuverability, but it could extend mission times a whole lot. So robot power does become a show-changer, but not a show-stopping issue.
OF course, it may have taken that long to come up with the neat names.
TJ, don't you just love those names? Lots of people have wondered if they're on purpose. I had the same question about the use of existing rad-hard technology for space and military apps back when I heard about the first people and robots going into the plant post-disaster. One would think they're taking advantage of those!
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
