ST Robotics' latest addition to its R12 robot product line is the Tandem R125, a low-cost, two-armed robot system that costs less than $20,000.
The Tandem R125 is comprised of two 5-axis vertically articulated robot arms, which are mounted to a programmable carousel. Its two robot controllers are interconnected, enabling communications to synchronize the motions of the two robots moving together; or allowing the robots to cooperatively alternate turns while performing one task.
"Unlike other manufacturers' recently introduced two-armed robots, ST Robotics' Tandem R125 is a real industrial system with real industrial programming, and at a fraction of the price," said David Sands, president and CEO of ST Robotics, in an email to Design News. "This really does bring two-armed robotics into the realm of small industry."
Including the programmable carousel, ST Robotics' Tandem R125 robot has a total of 11 axes. The entire system is available for less than $20,000 and includes everything to get up and running: the two R12 five-axis robot arms mounted on the carousel, two K11R controllers, RoboForth II software, intuitive teach pad, simple interfacing with other equipment, cables, manuals, a two-year warranty, and unlimited free technical support.
Other models and variations of ST's Tandem Robots offer two six-axis R12s for a total of 13 axes with a maximum reach up to 1000 mm, an R19 cylindrical format, and linear tracks up to 3m.
Applications for ST's robots benefit the manufacturing, nuclear, pharmaceutical, laboratory, and semiconductor industries. For more information, go to strobotics.com.
The reason thatbthings seem to be different in production is that the robots move much faster than during any of the setup modes, and also that (it seems), the production staff tend to run robots toward their maximum capabilities. The very exciting experience that I had was a robot that I had done the path programming for flinging a six-pound transmission part across the work area. Fortunately we were not yet in a production mode, and the part harmlessly hit the floor twenty feet away. But it certainly could have ruined sombody's day. That incident was the result of the production motion speed being set much faster than it needed to be, and the gripper air pressure being lower than it should have been set at.
In theory at least it should not be that very difficult to link the two robots into one robotic program. Putting two 5-axis robots on a common base is an interesting concept, and it does reduce the concerns that would exist using two six-axis robots side by side. One thing that ceratinly will require a bit of extra attention is the much greater inertia encountered when swinging the common axis. Inertia is one of those things that tends to "get in the way" when programming robotic motions. Things that work perfectly at setup speeds suddenly have problems when running at production speeds. This is most obvious when grippers are unable to hold the part securly during high speed changes in direction. The result can be a part weighing several pounds being thrown quite a few feet.
Hi Rob, I agree. The movement of the 2 robotic arms are very impressive. I thought the Dremel added a nice touch to the versatility of tools that can be attached to it. I wonder what robotic system is more cost competitive, ReThink Robotics "Baxter" or the ST Robotics Tandem Robot System? Very cool video!!
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.