ST Robotics' latest addition to its R12 robot product line is the Tandem R125, a low-cost, two-armed robot system that costs less than $20,000.
The Tandem R125 is comprised of two 5-axis vertically articulated robot arms, which are mounted to a programmable carousel. Its two robot controllers are interconnected, enabling communications to synchronize the motions of the two robots moving together; or allowing the robots to cooperatively alternate turns while performing one task.
"Unlike other manufacturers' recently introduced two-armed robots, ST Robotics' Tandem R125 is a real industrial system with real industrial programming, and at a fraction of the price," said David Sands, president and CEO of ST Robotics, in an email to Design News. "This really does bring two-armed robotics into the realm of small industry."
Including the programmable carousel, ST Robotics' Tandem R125 robot has a total of 11 axes. The entire system is available for less than $20,000 and includes everything to get up and running: the two R12 five-axis robot arms mounted on the carousel, two K11R controllers, RoboForth II software, intuitive teach pad, simple interfacing with other equipment, cables, manuals, a two-year warranty, and unlimited free technical support.
Other models and variations of ST's Tandem Robots offer two six-axis R12s for a total of 13 axes with a maximum reach up to 1000 mm, an R19 cylindrical format, and linear tracks up to 3m.
Applications for ST's robots benefit the manufacturing, nuclear, pharmaceutical, laboratory, and semiconductor industries. For more information, go to strobotics.com.
The reason thatbthings seem to be different in production is that the robots move much faster than during any of the setup modes, and also that (it seems), the production staff tend to run robots toward their maximum capabilities. The very exciting experience that I had was a robot that I had done the path programming for flinging a six-pound transmission part across the work area. Fortunately we were not yet in a production mode, and the part harmlessly hit the floor twenty feet away. But it certainly could have ruined sombody's day. That incident was the result of the production motion speed being set much faster than it needed to be, and the gripper air pressure being lower than it should have been set at.
In theory at least it should not be that very difficult to link the two robots into one robotic program. Putting two 5-axis robots on a common base is an interesting concept, and it does reduce the concerns that would exist using two six-axis robots side by side. One thing that ceratinly will require a bit of extra attention is the much greater inertia encountered when swinging the common axis. Inertia is one of those things that tends to "get in the way" when programming robotic motions. Things that work perfectly at setup speeds suddenly have problems when running at production speeds. This is most obvious when grippers are unable to hold the part securly during high speed changes in direction. The result can be a part weighing several pounds being thrown quite a few feet.
Hi Rob, I agree. The movement of the 2 robotic arms are very impressive. I thought the Dremel added a nice touch to the versatility of tools that can be attached to it. I wonder what robotic system is more cost competitive, ReThink Robotics "Baxter" or the ST Robotics Tandem Robot System? Very cool video!!
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.