Empowering wind power
In wind turbines, ultracapacitors help in electric blade pitch control systems, which adjust to changes in wind conditions to create electricity more efficiently. As a highly reliable option that performs well even in extreme weather, ultracapacitors are a more cost-effective option than batteries for wind turbines.
Batteries struggle in high peak power situations and perform poorly in cold temperatures. In extreme weather conditions, a battery has a severely limited operating life and poor charge acceptance, resulting in frequent component swaps under potentially dangerous conditions. However, ultracapacitors meet the high power demands of wind turbines to make rapid blade adjustments and operate in a range of temperatures from -40C to 65C. Their long life means little or no maintenance.
Consumer electronics and LEDs
Ultracapacitors provide a fast charge to handheld consumer electronics, including toothbrushes, shavers, clippers, and flashlights. Using ultracapacitors in such devices means little or no maintenance, less landfill waste, and an overall greener product, thanks to the ultracapacitor's long lifespan.
As LED adoption rises, extending a product's lifespan without increasing costs remains a challenge. Rechargeable batteries, which do not function properly when it is too warm or too cold, were previously the only energy storage option for off-grid LED-based products. Also, batteries' short lifespans meant replacing an entire lighting unit when the battery died, though the LED itself could last roughly 10 years.
Hybrid capacitors, which combine an ultracapacitor with a lithium-ion battery, provide greater energy-storage capabilities in LEDs, since they have a 115 percent higher energy density than a standard electric double-layer capacitor. Handheld devices using LEDs benefit from the fast, efficient power of a hybrid capacitor, which can charge a device in one minute while producing power to generate a light that lasts up to 90 minutes without recharging.
Next up for ultracaps
Laminated pouch ultracapacitor cells will offer more flexibility and high energy. These cells will emerge as high-power, high-energy-density alternatives to the traditional cylindrical cells. The pouches allow for a smaller module, which reduces the location issues raised by larger cylindrical cells. These flexible ultracapacitors are particularly useful in power conditioning applications, such as providing power in parts of the world where the utility grid does not produce the smooth voltage input or peak current needed to power machines. Although not new, thin pouch ultracapacitors will be adopted in more clean technology applications.
Ultracapacitors' high power and cost efficiency will continue to provide more efficiency and superior performance for a range of electronic applications. This will only fuel ultracapacitor adoption and drive the energy storage industry forward.
Chad Hall is the founder and a vice president of sales at Ioxus Inc.
I have to agree. I'm even a supercap user and this article seemed a little thin on data and fat on hype. I believe it was also posted before, about six months ago.
While I appreciated learning about the uses and applications for ultracapacitors, some diagrams, description of the manufacturing process, or any other hard data would have rounded out the article for me.
As others have posted, this does seem to be brochure quality. While a certain percentage of technical articles are written by those with a vested interest in promoting the technology (such as this one), most tend to be white-paper quality with a much higher percentage of background information...and then put the marketing spin on top of it to show how that particular product leads the industry. This one seems to have missed the first part.
I would like to see more development in the ultra/super capacitor arena. I used some in a project to replace a 9V battery, and they worked great. I will admit that the Joule density wasn't quite the same, but the recharge time was the balancing benefit. I would like to see extremely small 5V - 100F caps. The potential in such a cap would make it quite popular. I would have to agree, caps are the way to go for mobile devices. However, more energy elegance needs to be applied to these devices. Right now it is pretty brute force.. need more battery life?... install a bigger battery.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
