Getting an undergrad degree in engineering is hard. The course material is complex, competition is fierce, the time commitment is great, and the grades are generally on the low side of the bell-shaped curve. Put it all together, and it can make for a pretty grueling four-year experience. So when The Princeton Review came out with its annual edition of "The Best 377 Colleges," I wasn't surprised to again find that engineering schools did poorly in the area of student happiness.
We've written about this before. Year after year, The Princeton Review publishes its "unhappiest students" list, and every year it is disproportionately clogged with engineering schools. This year, six of the worst eight on that list were schools whose student bodies have a high percentage of engineers. On the happiness side, none of the top 20 were engineering schools.
The "least happy students" list in The Princeton Review's "Best 377 Colleges" book is again clogged with schools that have a high percentage of engineering students. (Source: The Princeton Review)
The question is: Why?
The answer: Getting an engineering degree can be painful.
"Engineering, math, and science are some of the more challenging fields, and perhaps students are translating that into unhappiness," William Kline, dean of innovation and engagement at Rose-Hulman Institute, said in an interview. "But I don't think there's anything about the field of engineering that makes students inherently unhappy."
The results might be different if The Princeton Review ran a survey asking the same questions a few months after the students graduated. I suspect the happiness ratio might rise at that point, especially among the engineering students who received multiple, high-paying job offers.
It's also worth noting that engineering schools aren't showing up on some of The Princeton Review's other notable lists. The book's well-known "party schools" list, for example, has nary an engineering entrant. Engineering schools are also absent in categories titled "lots of beer," "lots of hard liquor," and "reefer madness." Although I'm sure many engineering students drink their share of beer and liquor in college, they apparently aren't achieving quite as much in that area as their non-engineering counterparts.
Of course, that doesn't mean we should give a pass to those schools that keep landing on the unhappiness list every year. Engineering educators admit that some schools are too focused on research, and not focused enough on teaching. They say too many schools use language-challenged grad students as instructors. And they say theoretical course material is too seldom complemented by design experience.
"You have to focus on hands-on experience, so as the students learn the material in class, they have opportunities to put it into practice," Kline told us. He points out that schools that focus on teaching, rather than research, never seem to end up on unhappiness lists.
Even with that emphasis on teaching, however, we're never likely to see a day when engineering schools are described as fun and easy. Engineering curriculums will always be hard; the question is whether students are mentally and emotionally prepared for that kind of academic rigor. "It's challenging," Kline said. "It's a lot of work. But the world always needs engineers, mathematicians and scientists."
The Princeton Review's "Least Happy Students" List
Through my numerous major changes and several transfers I noticed that all the schools had something in common, they treated engineering curriculum as honor student courses and graded much, much tougher than any of the other classes. I think they failed to realize that there are honor student dorms with students taking honor classes. I had even been told we grade the way we do to protect the engineering professions from a flooding of people. I think it's the only curriculum that allows 25 steps of correct math operations to result in an F because the number at the end is incorrect. hmm.. I thought the professional certification at the end was to keep those not so good engineers from making big mistakes much like the BAR and CPA exams. Gotta love the way the fella in the article brushes off student unhappiness.
Actually, Ann, several of the schools that you mentioned -- Stanford, California-Berkeley, Illinois, Michigan, Texas, Cornell -- wouldn't have been counted as engineering schools, anyway. For the purposes of this list, I counted it as an engineering school if 50% or more of enrolled students are in engineering. In a sense, that makes it all the more amazing that so many e-schools made the list. The group of schools that have 50% engineering enrollment is very small.
I agree, tekochip. I believe one of the reasons for the unhappiness is that other students seem to have more time to go out on the town, while the engineering students are hitting the books. It makes them wonder why they're doing it. The answer to that question doesn't get revealed to them until they start interviewing for jobs.
Interesting that the 10 top-rated schools (US News & World report rankings)--MIT, Stanford, UC Berkeley, Georgia Tech, Caltech, U of Illinois Urbana Champaign, Carnegie Mellon, U of Michigan Ann Arbor, U of Texas Austin, Cornell--aren't on either list.
I have to agree that it's just a tough road to hoe. My youngest son is an Engineering student and it's definitely hard for him because of the scheduling commitment. His friends have chosen, shall we say, lesser disciplines and have much more free time than he can afford.
I noticed that one of the criticisms was that the schools concentrated too much on research. I initially studied physics at a large state school, and that was the criticism then (early 1970s). My son is at the Illinois Institute of Technology and they are on the list. Therer was a long and heated discussion on the IIT LinkedIn group about that. Now IIT has about twice the number of graduate students as undergraduates in many departments. It is definately a research school. That might be one of the issues, although I got the impression from my son's friends that they liked being there. It is hard to tell.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
