I see energy harvesting more and more in uC controlled, wirelessly connected industrial sensors and networks. There are also a lot of protocols for wireless connectivity (WiFi, Zigbee, etc.) that may help early adoption of this technology.
Agree. The ability to provide energy based on the actuation a device is quite interested. By pressing a button on a typical electric switch, packets of data can be transmitted to a near by receiver and its powered using the same mechanical action. The concept of Energy Harvesting seems like sci-fi but EnOcean has made it into reality. Truly amazing.
Interesting technology and just more evidence that wireless designs and automation are going to make a big impact in the years ahead, eliminating cabling and increasing the convenience and flexibility of systems.
misdirection of antiquated data processing instrumentation to provide better security for the status quo---metrology should play an important key in elevating design for functionality, as architecture, also designs for functionality where we would be living mostly below frostline, while saving on heating and cooling costs, paying for itself in a short time. We do everything all wrong, an extension of the academic caste system used to devide the classes, in all modes of living dictated into the pseudo-educational system, mostly
The EnOcean products are another forward step in ISA (Integrated Systems Automation) offered over the past several decades by little know companys to early adopter's such as military, government, commercial building owners, etc. The key however, to successful use of these emerging technology products is their installation by qualified and properly trained people.
This being said a user is well advised to check out the install contractor. The systems only work "as advertised" if properly installed, and may cause serious damage due to failure. To prevent this parallel or human overides should be considered upon installation and use.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.