Last week, we told you about college students demonstrating the grappling hooks they designed at the request of the US Air Force. The design was inspired by hooks used in the Batman films. Now we learn that Army soldiers were inspired by another film to design a backpack-like ammunition-feeding system.
After an intense firefight last year in Afghanistan, Iowa National Guard members discussed how soldiers struggled to carry ammunition in difficult terrain. They joked that it would be handy if soldiers could carry an ammunition box on their backs, like Jesse Ventura did in the film Predator. And so, an idea was hatched by an army staff sergeant, Vincent Winkowski.
Iowa National Guardsmen serving in Afghanistan came up with the idea for the Ironman ammo-carriage system from the film Predator. (Source: US Army)
The weapon that inspired him to build the ammunition carrier was the MK 48 7.62-mm machine gun. "The ammunition sacks that came with it made it too cumbersome and heavy to carry over long, dismounted patrols and especially when climbing mountains," Winkowski said in an article published on the Army Website.
Winkowski designed a new carrier by taking an old frame from a so-called ALICE (all-purpose lightweight individual carrying equipment) pack, welding two ammunition cans together, and strapping them to the frame. He also added a modular, lightweight pouch, or MOLLIE (modular, lightweight load-carrying equipment) pack, to the carrier, so soldiers could put other equipment in it. To deliver ammunition through the pack to the weapons, Winkowski took a piece of wood and fashioned a way to connect it to the feed chute assembly from an Army vehicle Common Remote Operating Weapons Station, or CROWS.
After members of the division tested the ammunition carrier in the field, the Army's Natick Soldier Research, Development, and Engineering Center (NSRDEC) saw photos of the prototype and took over the project. It made some modifications to make the carrier more mass production-friendly, switching out the original ALICE frame for a MOLLIE frame and replacing the inside of the ammunition compartment with polycarbonate plastic. The new design still employs the 27-inch feed chute designed for the CROWS, though the Army says researchers are working to design one that costs less than the $1,710 chute.
The new prototype -- called the High-Capacity Ammunition Carriage System but dubbed "Ironman," after the nickname of the Iowa National Guard whose members created it -- was completed 48 days after researchers saw the original design.
Dave Roy, a current operations analyst at the NSRDEC military deputy's office, said in the article that Army researchers hope to get the carrier into the formal product acquisition process this year to get the new capability into the hands of as many soldiers as possible. "If that material solution fills a gap, you don't just want to have one of them, or you don't want to just have the designs on a cocktail napkin," he said. "You want to have something to fill that capability gap very quickly."
I hope SSG Winkowski and his cohorts get into Engineering in some fashion. Necessity may be the mother of invention, but it takes smart people to bring it to fruition. Good job to all involved!
Army basic training stress following order. They tell you exactly when to wake, eat, sleep. You have no autonomy. That is necessary for soldiers to keep marching in face of danger. If you are told to carry this ammo box 20 miles you do it. You don't ask isn't there a better way.
Film and art industry stress creativity above all else. Problem solving requires creativity. Interesting film industry came up with the idea first. Interesting parallel is the quality of workforce between US and China. Oversea workforce are rigid and follow order. Understandable in a totalitarian regime. We stress creativity and innovation. Out students are allowed to question the teacher.
As technology advance, and we are facing a constantly changing enemy, Army may have to change their approach from a rigid top down to more lean manufacturing like. Each soldier have to come up with innovative ways to solve problems on their own.
Good example is Katrina. Coast Guard was the one branch that did well in the disaster. They were taught to make decision on their own instead of depend on a rigid command structure.
I was impressed by the speed as well. Sometimes, when you're closer to the problem, an entrepreneurial approach takes over.
The fact that one of their own designed this is great. I'm sure the need and the idea were there before but the creativity and technology may not have been avalable through the bureaucracy.
This seems like a great idea - I find it hard to believe that know one thought of this before. More likely, numerous people had considered similar concepts but all the "planets" finally lined up just right for it to move forward.
On a side note: Being from Minnesota - it pains me to know that Jesse Ventura had any part of this.
I agree, Naperlou, the really amazing aspect of this is not so much that the users came up with it, but that someone above them was able to see the wisdom in it.
Beth, it is amazing what you can do when you are close to the problem. It is also amazing that the Army picked up on it so quickly. I just hope they can keep the acquisition process on a fast track.
While not an example of crowdsouring per say, this shows the power of letting everyday users put their heads together to take a product to the next level. Tapping into the collective wisdom of real people actually using real products can deliver insights into what works and what doesn't that just isn't possible by non-users even if they are engineers.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
