HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
News
Materials & Assembly

Navy Developing Shipshape Titanium Welding

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
Page 1/2  >  >>
Ivan Kirkpatrick
User Rank
Platinum
Titanium welding
Ivan Kirkpatrick   4/16/2012 10:58:31 AM
NO RATINGS
As a former Design Engineer at Newport News Shipbuilding I worked extensively with titanium alloys in the design of submarine components.  Titanium is an excellent material for a number of reasons and is especially well suited to a marine environment because of it's corrososion resistance and strength.

Some time back the Russian navy produced a class of subs with a titanium hull.  They were welded in a large inert gas filled chamber with welders in moon suit like gear and oxygen supplied through hoses.  The issue at the time as far as my understanding goes was that in order to prevent contamination of the weld material the hot weld must be shielded with argon gas until the weld is below around 650 degrees F. 

Dave Palmer
User Rank
Platinum
Re: Titanium welding
Dave Palmer   4/16/2012 11:58:23 AM
NO RATINGS
@Ivan: Friction stir welding is a solid-state welding process and doesn't require either fill metal or a shielding gas.  So you don't need to wear a space suit in order to do it.  It also results in some beneficial microstructural changes which improve material properties. (Sometimes the process is applied to a surface specifically to induce these microstructural changes, rather than to weld one surface to another).  It's a very promising process, and it's great to see this collaboration between industry, government, and academia to develop it.

naperlou
User Rank
Blogger
Re: Titanium welding
naperlou   4/16/2012 2:11:34 PM
NO RATINGS
Ivan, the Soviets were willing to take chances with people's lives in all kinds of situations.  It is good to see that a safer process is being developed. 

The issue, as the article states, is with the tools.  They have to operate in very adverse conditions. 

As for the cost, most military systems that would use this technology and material have a very long life time.  Just look at the B-52.  My father worked on the design of it around the time I was born (and you can see that was a while ago).  They are still flying and projected to be around for a long time.

Capt. Ron
User Rank
Iron
Correction on current process.
Capt. Ron   4/16/2012 4:01:17 PM
NO RATINGS
Elizabeth,

Sorry, but we evloved from using the old heat it up and smash it togther process of welding many decades ago. The current most popular processes use an electrical arc to create a metal puddle, if you will, to melt two metal pieces together. There are several forms of this, Arc welding, TIG and MIG just to name a few. The new process you mentioned in the article is still a very impressive development, however, if it tests out that it indeed has the long term structural integrity needed for ship building.

Greg M. Jung
User Rank
Platinum
Weld Material Properties
Greg M. Jung   4/16/2012 8:49:54 PM
NO RATINGS
From the article, I didn't get a sense if the weld joint strength was stronger than/weaker than/or same as the surrounding material.  There are obvious manufacturing advantages to this new friction welding, but I wonder how does the resulting material properties of this new process compare to the more traditional methods?

ChasChas
User Rank
Gold
stir welding
ChasChas   4/17/2012 10:32:51 AM
NO RATINGS
 

Looks like stir welding disturbs the metal as little as possible to preserve the material properties.

http://www.youtube.com/watch?v=jCe8-QYKZf4

Interesting.

Headhunter
User Rank
Iron
Re: Titanium welding
Headhunter   4/17/2012 10:37:26 AM
NO RATINGS
The Soviets followed up with a robotic system that was able to weld the 4 in thick hull in a single pass. No doubt making the next variant in Titanium a "no brainer".

B

Headhunter
User Rank
Iron
Re: Titanium welding
Headhunter   4/17/2012 10:44:37 AM
NO RATINGS
I wonder what the maximum thickness would be? Probably could be doubled if matching welder operated on opposite side.

Probably has a cooling system for the pin. Realy neat idea.

B

Ivan Kirkpatrick
User Rank
Platinum
Stir Welding
Ivan Kirkpatrick   4/17/2012 10:54:25 AM
NO RATINGS
I believe I saw soemthing on TV about the Airbus A380 using some stir welding processes as well.  I don't recall if it was on titanium pieces or Aluminum but it was interesting.  The video of the actual process was impressive in how little it affected the workpieces being joined.

It would be interesting to note the limitations of the process as applied now and also to see what is being undertaken to make it more versatile.  stir welding a 4 inch thick piece of Titanium hull section would certainly be an impressive feat.

Does anyone have details on this process?  What I saw in the video on Airbuss looked like a spinning tool being forced into the intersection of two sheets of materials.  As the tool progressed along the interface the rapid spinning created friction to plasticise the metals and it closed up around the tool on the trailing side.  It made a very neat and clean looking bond.  Presumably full strength.  

Kate Pennella
User Rank
Iron
Titanium Welding
Kate Pennella   4/17/2012 4:00:43 PM
NO RATINGS
Just as an FYI, the International Titanium Association (ITA) offers a "hands-on" class in Titanium Welding, Welding Brochure

Page 1/2  >  >>
Partner Zone
Latest Analysis
Today's robots should be respected, and humans should be wary of their growing skills and sophistication. Quite simply, robots are better than us in a lot of ways. Here are 10 of them.
3D printing has met up with drones in a 3D-printed UAV. University of Sheffield engineers printed the prototype drone in 24 hours from ABS plastic using Fused Deposition Modeling.
Product design is changing with advances in technology and outsourced manufacturing. The Art of Product Design spells out the future of design engineering.
AMD is set to launch the industry's first 16 GB workstation graphics card -- the W9100.
Samsung's 5th-generation Android-based Galaxy smartphone includes a fingerprint scanner, updated camera and display, and water/dust resistance.
More:Blogs|News
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service