LISA Airplanes has completed test runs and frozen materials choices for the first production unit of its high-speed, amphibious AKOYA skiplane. Composites play a big part in the plane's structural components.
The AKOYA is a two-seater amphibious plane that can land on and take off from water, land on snowy surfaces, travel at least 1,600 kilometers (or 1,000 miles) before refueling, and reach speeds of 250kmh (or 135 knots). Its retractable landing gear is equipped with skis. The plane can land on a field less than 200 meters long, and it can fold its wings to be parked inside a garage.
LISA Airplanes conducts flight tests of its high-speed, long-distance AKOYA amphibious skiplane, whose structures are made primarily of composites. The plane is shown taking off at low speed from France's Bourget Lake. (Source: LISA Airplanes)
Unlike traditional amphibious planes, the AKOYA does not have a float, hull, or step, which improves aerodynamics and flight performance. Instead, the company's patented design uses two underwater fins called Seafoils, which let the plane lift its fuselage out of the water quickly. The fins also provide stability during takeoff and landing on water, giving the craft better tolerance in choppy seas.
The airframe, including wings and fuselage, is made entirely of composite materials, which are also used in several small parts of the plane. These materials include fiberglass, Kevlar, carbon prepreg, and lightweight sandwich structures consisting of carbon-fiber-reinforced plastic with a polymer foam core.
"All the weight-bearing primary structures are made of carbon prepreg or carbon sandwich," Vincent Cordeau, supply chain manager at LISA Airplanes, told us. "The Kevlar is used to protect zones against perforation and tearing. For instance, the area under the fuselage has a Kevlar external layer. Fiberglass layers are used to make external layers for waterproofness and finish quality."
Ivan, good point about Alaska, especially since it's so huge and so roadless. Other areas I'd like to take this plane to include northern Scandinavia and the northern stretches of central Asia.
One place this design might find a lot of use is in Alaska. Long distances, lots of snow and water would seem to be an ideal set of requirements for this airplane to fulfill. Also Alaska has a long history of bush pilots and airplanes. Not that this design is anything like a bush plane.
The fact that this baby lands on snow--and uses skis--is what made me want to write about it. It looks like it would be a lot of fun to fly and land on multiple surfaces.
willamweaver, regarding crash-optimized composites in aircraft, not automobiles, Boeing has done extensive crash tests with all the composites used in its 787 Dreamliner, as we reported on here:
I have always liked the idea of amphibious aircraft adn the flexibility they have in landing areas. Adding is snow is even more interesting. This is certainly an interesting design.
Bill, the AKOYA is designed and custom built by a French company, not an American one. The FAA has no say about aircraft built and flown in Europe, only about those sold in the US.
"Build in the functionality you want" is a metaphor, not an invitation to a kit builder. The website clearly states "LISA Airplanes - a French company with international ambitions - creates, produces and distributes top of the range airplanes, products and services."
Rusting away is a good part of it but just as important is it's not the way they do it mentality also. Now add they weigh under 500kg in the 2 seat sizes and they just can't handle that much change.
As far as crash protection it can be excellent as always the correct design means even more. I use F-1 crash tech, hard driver/passenger area with energy absorbing ends.
While I think another SUV hitting an SUV won't be good either with good design lighter composite vehicles can survive better than in steel. Some of my designs crash systems is patentable but others like foam, l etc are well known as is the way F1's keep a driver safe at 200mph into a hard wall and walk away.
Probably the best use of my FreedomEV all composite 2 front wheel 3wheeler is for cop patrol with a single center seat that if well 4-5 point seatbelted in could survive almost anything. And cutting their energy use by 90% in that service especially in the southern heat with the AC, etc run from the batteries. Burning 20hp to get 1kw just isn't smart.
Another thing in light vehicles is you can't put too much force on them as if designed to, will just get pushed, spun usually, aside. I know this from experiece!!! I was rear ended in one by a compact car at about 25mph which totaled the car and only cost me $40 to get mine back on the road with no injuries to me.
Why is I designed the rear wheel to take the hit which also raises up the rear letting the car slide under it and worked just as designed. I never expected to test it and was extremely happy it worked ;^P
If they wanted to they know how. Check out these GM Ultralite, RunAbout and Aero they did decades ago. And 80mpg or better!! Yet they can't do it now? Why? Because it scares the hell out of them to change.
Thanks for the detailed reply, @Jerry. Valuable information! When it comes to the use of composites in automobiles, do you really suspect the disruptive nature of a non-rusting last forever component or could it be safety? I know tensile strength and toughness of composites far surpass the values for steel and light-weight alloys, but I have not seen a composite vehicle in a crash test. I just don't have any data on how a 2000-lb composite passenger car would make out in a collision with a 4500-lb steel-frame SUV...
Composites sell starting at 100+ lb lots for fiber or polyster resins used to cost $1-2/lb for various fiberglasses with higher tech ones the higher side. Now they are hitting about 2x's that.
Composites have been scaled since 65 and 1 reason I like it as I can buy OEM size lots at OEM prices. Here in Fla we have the largest boat industry in the US so you won't find a lot of things but, we have composite, boat suppliers coming out of our ears so a very competitive market with all the players.
Epoxies have too as have various cores starting at higher levels. Cores especially have went up which is interesting as they have the least material. I'm just getting back into composites and haven't got the most recent CF, Kevlar prices but price in news items about it haven't come down. As I have need of Kevlar or similar fabric soon I'll be finding out exactly how much.
For most the inflation over the last 10 yrs caused by Repub stupid energy, war, ballooning debt policies has over doubled raw materials and CEO's, board members salaries have increased greatly is the main driver as energy as oil feedstock for many resins or for converting sand to FG, etc takes costly fuels, are the main reasons .
As for highly trained labor if I can't teach someone in a few hrs they are history. Then have them help some else for a couple months. If they are not really good by then, bye. It's how I started and just not hard.
Hand lay-up Labor, molds, etc for composite parts is rarely more than materials cost and usually far less, depending on number, etc. If hand layup is worth it depends on the part and it's value. Larger and strong, light part specs is hand lay up sweet spot.
I've done the numbers on car body/chassis and have one a few feet from me says they can be built for the same or less than in steel, alum while being stronger, better. I can do that for about any car, truck design cutting vehicle weight, thus cost by 30+%, thus better mileage and smaller drivetrain, saving much cost.
The reason you don't see them is big auto is afraid of building a car, truck that doesn't rust away thus needing replacement. Same with EV's, too few parts to replace, sell.
Luckily resins, Kevlar can be made from biomass. Solar furnaces can produce FG and likely CF from sand and biomass. CF is already made from biomass. Add it's high strength, lightweight and doesn't rust and for many things it's the smart choice.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
