Biofuels are becoming more common in road transport, at least in Europe, and they are poised to enter the air transport sector there. They are not used much yet in shipping. But a recent study by the Dutch research firm Ecofys concludes that biofuels could prove a viable alternative to marine fossil-based fuels.
The study, commissioned by the European Maritime Safety Agency (EMSA), shows that the technology is available to replace the fossil fuels used in ship engines with biofuels. Not only would this substantially reduce harmful emissions in the air and water, but it would also improve air quality in port areas and other populated areas around waterways. It could also be more economically advantageous. Fuel may generate up to 50 percent of a ship's operational costs, since fueling can take a long time for large ships with multiple tanks.
The study concluded that the main barriers to marine biofuels are policy and organizational limitations, not technical shortcomings.
According to a European study, biofuels are viable candidates for replacing the fossil-based fuels being used in shipping. (Source: OOCL)
Ecofys researchers examined the technical, economic, sustainability, legal, and organizational aspects of introducing biofuels into shipping. They found that adjustments to the marine fuel supply chain would depend on the type of ship and its engine type, the type of biofuels being introduced, and the fuel's specific blend percentage.
Six major biofuels were examined for different replacement purposes -- biodiesel, dimethyl ether, straight vegetable oil, bio-liquified natural gas (or bio-methane), bio-ethanol, and pyrolysis bio-oil. Biofuels have an overall lower energy density than current marine fuels, and different biofuel types have different densities. Some would require a large amount of modification to become candidates for drop-in marine fuel replacement. The most promising at present are blends with up to 20 percent biodiesel for replacing marine diesel oil or marine gas oil.
Is there any concensus on how oil is formed? I looked it up (because I honestly don't know), and one article I read used the phrase "it is a known fact", which immediately makes my BS detector go off.
The article stated:
"The answer to how is oil formed in nature, lies in the two most widely acclaimed theories - biogenic theory and abiogenic theory. So let's see, what these theories have to say."
Then it went on to form a conclusion that it presented as "fact". I don't know how you form a factual conclusion based on two "widely acclaimed theories", but they did it.
How is oil is formed? (this is not a trick question) you made the statement "If you think of how oil is formed" in such a matter of fact way that I felt like the answer should be obvious. When I tried to think of how oil was formed, it wasn't obvious to me, which made me curious.
By the way, I also believe that there is much more oil than we supposedly know about, but I don't have any theory to back it up. If you just do some simple math, if oil were as scarce as we are led go believe, we would have probably never found it in the first place. The "known" oil reserves are somewhere in the vicinity of 10's of cubic miles. When you compare that to the volume of the earth it is a needle in a haystack.
I like the "nuclear battery" idea. I have long thought that nuclear reactors could be scaled down to the size of a baseball if we worked at it.
I like your example of a balanced portfolio. It is very similar. I hope that the government allows these mulitple groups to continue to work and can provide support to each equally if necessary. In some cases one or more group may have captial already established, while a new and emerging technology may need capital.
Great job on the hypothetical example. I always hate the idea of government regulations and "helping" us go in the right direction...because as you said, "the government knows best."
There is such a balance between the government helping expand a new and emerging technology and dictating the direction that we as independant businesses choose to put our resources.
GlennA, the market has already adjusted to the price of oil, I remember the first, and especially the second, oil shocks. I had small sports cars at the time. They were not relaible, but got great gas mileage (that is not why I bought them). When I had to borrow my father's third car, an old Oldsmobile Delta 88, it was a real problem. It got about a third the gas mileage that my regular commuting car got. I couldn't afford to run it (well I could, but i didn't want to). Cars with those mileage characteristics do not exist any more.
On a more global note, the amount of oil required to produce a dollar of economic output in the US is well below what it was in the 1970s. We also are finding much more oil that we thought existed. The Middle East is the easiest place to pump oil, expect for the turmoil it causes. That will move production elsewhere over time. We have lots more oil than thought. That trend will not change. If you think of how oil is formed, it makes no sense that it is only available in a very limited number of locations. Any replacement for oill will have to be as easy to use. That will take some time, but it will come. How about nuclear batteries? Weren't those talked about at one time?
I see what you mean about the future of computation, as far as wearable computers go. And I certainly get how fast everything is changing, having covered electronics and electronics-related design and manufacturing for over 20 years. I suspect we will see both personal computation devices, since people like to personalize, and public access devices. OTOH, such dependence on the cloud still assumes we have 100% uptime of both electricity and Internet access, and I don't think we can make that assumption.
Thanks for going into more detail about your thoughts on both topics. It would certainly be better if we could somehow predict the future well enough to figure out innovations first and regulate second--or if we had the luxury of decades to prepare. But that's not the case with several environmental issues facing us. The EU is ahead of the US on first mandating (not exactly the same thing a regulating) and then working with industry to figure out how to meet those mandates, in several of these areas. Yet this doesn't seem to be stifling innovation at all; instead it appears to have the opposite effect. Japan is a also a good example of the same principle. In both locations, everyone seems to understand that they are all in this together. They are citizens--members of the polis--as well as business people. Meanwhile we've been dragging our feet over here in the name of not stifling innovation, which, in comparison, implies our innovative spirit must not be strong enough. That doesn't sound like America to me.
@Ann, I wasn't presenting my view of future... just a collection of possibilities to illustrate how quickly technology is advancing. Imagine 10 year's ago in April 2002: Google was 3.5 years old, Facebook, YouTube, LinkedIn, and Twitter did not yet exist, stylus-based PDAs were only used by early adopters and techies, and cars could net yet automatically parallel park.
Through examination of innovation rates in information technology, we can draw similarities to innovation rates in other industries, such as energy and manufacturing. I personally find it difficult to expect that we will be pulling into the local convenience store to pump 87 octane gasoline in the year 2212. My point against Regulation-Catalyzed Innovation is that innovators need to be "on board". After the Chicago Tylenol murders in 1982, product-safety Regulations were created that often trailed innovations in product safety -- no manufacturer of any product wanted their product altered or sabotaged before purchase. But when dealing with Alternative Energy, Regulations that are in place BEFORE innovations have a chilling effect on other innovations as inventors scramble to meet them, diverting time, personnel, equipment, and energy from other projects. My lament is against Politically-fueled Regulations that are put in place to satisfy a political ideology or political favor.
As for the visions for the possible future of computation it appears that at least two innovators are announcing a reprise of the "Stone Age" in ceramics and glass. Corning has presented its vision in "A Day Made Of Glass 2", while only yesterday, Google announced its "Project Glass". Corning's vision is inline with my mention of "public access" while Google's vision includes wearable computing, initially in the form of glasses.
I don't agree with your view of the future regarding cloud computing for several reasons, but the most important one is, it assumes everyone always has a) electricity and b) internet access. That's not the case and probably won't be, either ever or for a really long time. Beyond that, I don't at all get what it is you think we'll be accessing the cloud with. Public access devices don't seem realistic to me, partly for the reasons just mentioned. I also agree with Beth, I think people will continue to want their own personalized handhelds.
We need a multi-pronged strategy to dino-based fuel alternatives, both because we're running out probably a lot sooner than 2212, but more importantly, because they're harmful to the environment. Meanwhile, we're going to need all kinds of alternatives in the short term, including some we can source closer to home--while we're working out long-term strategies that can hopefully eliminate environment-harming practices like combustion engines. And we should certainly not wait until 200 years from now to find those alternatives.
BTW, "politics" comes from the Greek words for city and citizens. We may be in the business of technology, but we are also citizens, and must make rational and sensible decisions about our resources.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
