Materials & Assembly

Adhesives Put New Twist on Fastening

Page 1 / 4 Next >
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/2
Alexander Wolfe
User Rank
Re: Economic advantage
Alexander Wolfe   1/6/2012 5:23:26 PM
Great overview of adhesives, Ann. I was recently fortunate enough to take a tour of one of the Fabrico facilities, and it's really interesting to see the sophisticated layering process, utilizing adhesives, by which the end products are manufactured and QC's (via machine vision) as they go down the line.

Dave Palmer
User Rank
Adhesives vs. mechanical fasteners
Dave Palmer   1/6/2012 3:45:17 PM
Ann, thanks for the whirlwind tour through the world of fastening.  You covered a lot in this article!

My first reaction when you mentioned a shear strength of 1000 psi for a structural adhesive was that it seemed very small compared to the shear strength of a Grade 8 bolt (around 100,000 psi).  Then it occurred to me that, with an adhesive, the load can be spread out over a much larger area.

As a rough approximation, for a structural adhesive with a shear strength of 1000 psi, 7.5 square inches of adhesive should be able to withstand the same load as a 3/8-16 Grade 8 bolt.  Neat!

Ann R. Thryft
User Rank
Re: Economic advantage
Ann R. Thryft   1/6/2012 3:22:11 PM

Interestingly, although cost is always an issue, most  vendors mentioned the differences in function and problems to be solved between fasteners and adhesives. And when it came to cost, what most (adhesives) vendors mentioned regarding the cost differentials had to do with lower cost processes for applying adhesives, not a difference in the cost of materials or the items as such.

Rob Spiegel
User Rank
Economic advantage
Rob Spiegel   1/6/2012 2:32:14 PM
Nice article, Ann. I didn't realize the wide range of uses for adhesives. You mention the economic advantages of adhesives in the manufacturing process. I would imagine there is also an economic advantage is the cost of materials. Most mechanical fasteners are probably far more expensive than adhesives.

<<  <  Page 2/2
Partner Zone
Latest Analysis
Days after a massive, distributed denial-of-service attack took down dozens of major websites around the country, ARM Holdings plc is rolling out a pair of new processor architectures aimed at shoring up IoT security.
Dow Chemical and several other companies have launched a program in Omaha, Neb. to divert about 36 tons of plastics from landfills in its first phase, and convert it into energy used for cement production.
Both traditional automation companies and startups are developing technologies to improve processes on the factory floor, while smart sensors and other IoT-related technologies are improving how products are handled during transport and across the supply chain.
Remote monitoring now looks beyond the individual motor or conveyor and instead views the process from end to end.
BASF is partnering with Hyundai on a high-performance concept car that showcases both eco-friendly, sustainable materials and materials to enable lighter weight cars.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service