Automation & Motion Control

Hardened, Robust Switches & Routers

Page 1 / 2 Next >
View Comments: Oldest First|Newest First|Threaded View
Alexander Wolfe
User Rank
When it absolutely has to work
Alexander Wolfe   7/5/2011 9:31:24 AM
Jim makes an important point about the lack of interchangeability between commercial routers and switches and industrial ones. The same thing goes for PCs--perhaps even more so. This article talks about hardening mainly in terms of physical hardening -- resistance to temperature extremes and use of conformal coating as protection. The other aspect is that commerical PCs and network gear have subtle differences from model to model, or even in the same generation. This makes the kind of swapping out that's done in the commercial world much more difficult to get away with in industrial settings, where the gear has to work and be up 100%, without having to constantly send in an IT person to tweak settings and diagnose problems.

TJ McDermott
User Rank
Re: When it absolutely has to work
TJ McDermott   7/9/2011 4:23:32 AM
The switch may be industrial, but as I commented in the Ethernet in the car article, the connectors are NOT.  RJ45 does not belong in industrial settings; it's time for a new robust connector.  M12 Code D might be it.  Maybe M8 for higher connector densities?

Jack Rupert, PE
User Rank
IP Ratings
Jack Rupert, PE   7/10/2011 3:12:01 PM
There are a number of vendors out there that make what they might call industrial strength Ethernet devices.  There is still room for improvement beyond simple temperature and vibration specs.  I would like to see something with an IP-67 rating, for instance, so you don't need to enclose everything.

(TJ, I just added a comment to the auto article as well adressing the plastic tab connector concern).

Partner Zone
Latest Analysis
Governmental policies and mandates in Europe are leading the way in creating low-carbon manufacturing.
Digital healthcare devices and wearable electronic products need to be thoroughly tested, lest they live short, ignominious lives, an expert will tell attendees at UBM’s upcoming Designers of Things conference in San Jose, Calif.
Designers of electronic interfaces will need to be prepared to incorporate haptics in next generation products, an expert will tell attendees at the upcoming Designers of Things conference in San Jose, Calif.
According to a Randstad Engineering compilation of salary studies, engineering salaries are increasing beyond inflation, with employers paying to keep potential suitors away from their employees.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Design News Webinar Series
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/29/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
12/2/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service