Simplifying the Complex in High-Risk Duty Robots

View Comments: Threaded|Newest First|Oldest First
Greg Stirling
User Rank
Well Done.
Greg Stirling   6/24/2011 2:27:57 AM
This is exactly the design approach which produces success.  Congratulations to all involved.

Ivan Kirkpatrick
User Rank
Design Reviews
Ivan Kirkpatrick   6/24/2011 1:32:49 PM

One of the first things I look for in a Design whether it is in software or hardware is if I can think of a way to make it simpler.  Another thing I learned was if you ask the Manufacturing guys what they think of your design you will likely get a lot of suggestions for making it easier and less expensive to manufacture while still keeping the original functionality.  


Long ago I owned an older Mercedes and had occassion to replace the turn signal switch.  I had a chance to compare the German design with an American one.  Although the designs were pretty similar for the most part, the German switch was definitely more elaborate and obviously designed to last longer.  It also cost double that of the American car part.


Collaboration can usually be counted on to improve the overall Design, Cost of Manufacture and Service Life.  One might think the Design is complete, but that will most likely persist only until the first and hopefully early Design Review.

Partner Zone
Latest Analysis
The transformative nature of designing and making things was the overarching, common theme at separate conferences held in Boston by two giants in the PLM space: Autodesk, with its Accelerate 2015, and Siemens’s Industry Analyst Conference 2015.
Innovations such as “scrum” and virtualization methods have changed the project management game.
Extreme stress tolerance, thermal management capabilities, and EMI protection. What more could you want in a gap filler for PCBs?
Minnesota Electric Technology recently introduced a class of 3.6-inch permanent magnet DC motors for battery-powered (or solar-powered) equipment that occupies the 1/3 - 2 HP space.
On Manufacturing Day, we take a look at the vast changes and top trends in manufacturing happening now.
Design News Webinar Series
10/1/2015 11:00 a.m. California / 2:00 p.m. New York
9/10/2015 11:00 a.m. California / 2:00 p.m. New York
8/13/2015 11:00 a.m. California / 2:00 p.m. New York
6/25/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 5 - 9, Standards for the Internet of Things (IoT)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service