Inc.'s SeaLINK+485-DB9 is a new single-port USB to RS-485 serial adapter
with a ruggedized, overmolded enclosure. The SeaLINK+485-DB9 offers fast serial
communication for tough environments, including factory floor, mobile and
The serial port appears as a standard COM port to the
host computer for setup and compatibility with legacy software. The
SeaLINK+485-DB9 has a programmable baud rate and data formats with 128 byte
transmit and 384 byte receive buffers. Each adapter includes a removable
terminal block adapter that simplifies field wiring. Thumbscrews on the TB34
secure the terminal block adapter to the serial port and prevent accidental
SeaLINK+485-DB9 is compatible with standard PC baud
rates and supports high-speed communication to 921.6K bps. The adapter is
powered by the USB port and status LEDs molded into the enclosure indicate
serial data activity and connection to the host.
SeaLINK USB serial adapters ship with Sealevel
Systems SeaCOM suite of Windows drivers and diagnostic utilities. WinSSD, a
full-featured application providing testing and diagnostic capabilities, is
also included. Use WinSSD for Bit Error Rate Testing (BERT), throughput
monitoring and transmitting test pattern messages.
To meet the demands of working in harsh industrial
environments, the SeaLINK+485-DB9 operates over an extended temperature range
of -40 - +85C. The attached 44 inch cable is fully shielded to protect the
adapter from RF and EMI interference, which are common in mobile and industrial
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Traditional dev kits are based on a manufacturer’s microcontroller, radio module, or sensor device. The idea is to aid the design engineer in developing his or her own IoT prototype as quickly as possible. A not-so-traditional IoT development kit released by Bosch aims to simplify IoT prototyping even further.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.