MOST Cooperation's MOST150 Electrical Physical Layer Sub-Specification Rev. 1.0 based
on coaxial cable is a multi-channel network (control data, synchronous and
packet channel), which allows the parallel usage of these services through
one network. It provides an isochronous channel for video data transmission and
enables IP data communication. The automotive-ready Ethernet channel is according
to IEEE 802.3. with freely configurable bandwidth from 0 to nearly 150 Mbit/s.
MOST150 supports the safety layer concept to enable fail-safe application up to
SIL level 3 according to IEC 61508 and ASIL C according to ISO 26262.
The FDA has just released draft guidelines for using 3D printing in the design, development, and manufacture of regulated medical products. Although the recommendations are non-binding, they do set some much-needed parameters.
We're talking a look at 10 of the coolest technologies being developed by the US military today. In addition to saving lives on the battlefield, don't be surprised if you see some of these in your daily life some time in the near future.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.