has expanded its FR Series of 10mm surface mount DIP rotary switches
to include a shaft-actuated option. Previous versions of SMT FR Series devices
were only available with screwdriver actuation. The FR02 shaft actuated version
enables hand actuation, while still retaining the ability to be adjusted with a
flat tipped screwdriver. With a height of 3.8 mm the FR Series devices have a
low profile and allow close stacking of PC boards.
detent mechanism of the FR Series gives a positive action providing accurate
switch setting. Actuators are fully rotational and can be operated either
clockwise or counterclockwise. Ten-position decimal and 16-position hexadecimal
configurations are available in real or complement codes. Legends with an arrow
indicate position for trouble-free code setting whether shaft or screwdriver
actuated. Color-keyed actuators identify codes.
activated movable contact and gold contacts ensure contact reliability and
continuity. The electrical rating is 100mA @ 5V dc while switching, and 100mA @
50V dc when not switching. The operating temperature range is -25 to 85C.
devices are straight mount and feature gull wing terminals. Gull-winged
terminals deliver mechanical stability during soldering and simplify solder
joint inspection. The coplanarity tolerance zone is 0.15 mm maximum, the
allowable distance between all considered surfaces in two parallel planes.
devices meet the RoHs directive restricting the use of hazardous substances and
the heat resistant resin materials are UL94V-0 and allow for infrared
convection reflow soldering. Packaging for FR02 switches includes a tape-reel
of 200 pieces for shaft-actuated models or 500 pieces per tape-reel for
screwdriver actuated models. Stick tube packaging of 50 pieces is also
We searched far and wide for the top employers for engineers. These companies were ranked by engineering professionals, engineering students, and engineering instructors and professors. Does your employer make the grade?
While every company might have their own solution for PLM, Aras Innovator 10 intends to make PLM easier for all company sizes through its customization. The program is also not resource intensive, which allows it to be appropriated for any use. Some have even linked it to the Raspberry Pi.
Using a 3D printer, CNC router, and existing powertrain components, a team of engineers is building an electric car from scratch on the floor of the International Manufacturing Technology Show in Chicago this week.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.