Kontron's Embedded Box PC CB511 has been developed to operate in
especially tough environmental conditions, and is equipped with an Intel Atom
N270, energy efficient and is designed for the extended temperature range of
-15 to +60C. The Kontron Embedded Box PC CB 753 with Intel Core 2 Duo processor
features two PCI slots and a PCI Express Mini Card slot for flexible
configuration, making it useful for a wide range of OEM applications.
Kontron's Embedded Box PCs CB 511 and CB 753 can be
integrated into OEM applications in the fields of automation, digital signage,
gaming and infotainment. Both Box PCs have different mounting options for
vertical and horizontal mounting or for rack-mount. The MTBF (Mean Time Between
Failures) has been specified at approximately 50,000 hours (Kontron CB 753:
40,000 hours) and are CE certified and designed to meet UL. The Kontron
Embedded Box PCs CB 511 and CB 753 will be available in EMEA in April 2011.
Kontron Embedded Box PCs support Linux Embedded, Microsoft Windows XP, Windows
XP Embedded and Windows CE 6.0.
Features of the Kontron Embedded Box PC CB 511
Measures 51 x 250 x 140 mm
Intel Atom N270 processor with
Intel 945GSE Embedded chipset and up
to 2GByte of DDR2-RAM
Standard version comes with the
industrial interfaces; 1x RS232, 2x GB LAN, 4x USB and VGA
Optionally it can be equipped with
1x e-SATA, 1x DVI-D, 1x RS232 and Wi-Fi
Can also be extended with a Mini PCI
Express extension slot and a CF socket for data storage
Features of the Kontron Embedded Box PC CB 753
Measures 75 x 350 x 260 mm
Intel Core 2 Duo Mobile P8400
processor with 2.26GHz, 1066MHz FSB and up to 8 GByte of DDR3-RAM.
Configurable interfaces: 4x USB, 3x
GB LAN, 4x RS232, PS/2 M+K, VGA, Line in, MIC In, 7.1 HD Audio, 1x Firewire and
Two PCI extension slots or one PCI
Express x16 extension slot and a PCI Express Mini Card slot
Can be configured to DVI-D, Wi-Fi,
GPS, CAN or digital I/Os
A bay for a 2.5 inch SATA-HDD or SDD
and a CF socket are available for storage media.
Two new technologies from Stratasys, created in partnership with Boeing, Ford, and Siemens, will bring accurate, repeatable manufacturing of very large thermoplastic end products, and much bigger composite parts, onto the factory floor for industries including automotive and aerospace.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.