NKK Switches'JWMW and JWLW series are IP67 rated panel sealed rocker switches with TV ratings. The smaller JWMW series features a panel cut out of 25 X 15.4 mm and is certified for TV-5. It has an electrical capacity of 10A @ 125/250V ac resistive and 10A @ 30V dc. Larger JWLW devices have a panel cut out of 30.7 X 20.5 mm and are TV-8 rated with an electrical capacity of 16A @ 125/250V ac and 5A @ 72V dc.
JWLW devices are well suited as power distribution switches for telecommunications applications. The series' capabilities exceed a 160A inrush load. These devices have an exterior seal covering the flange that is an integral part of the switch. They are rated to IP67 of IEC60529 standard, which is similar to NEMA 4 and 6. An optional watertight boot is also available. Featuring UL, CSA and VDE approvals, JWMW and JWLW switches also carry a flammability rating of UL94V-0.
All JW rocker switches are constructed for dust resistance with an interior polyphenylene sulfide seal between the actuator and contact area. These devices also feature prominent external insulating barriers which increase the insulation resistance and dielectric strength. JW housings and cases are polyamide, a heat resistant resin meeting UL's 94V-0 standards. The solder lug/quick connect terminals are molded in and epoxy sealed to lock out flux, dust and other contaminants. The terminals are also specially designed to break light contact welds and can be used with connectors.
Design engineers can configure SPST, SPDT, DPST or DPDT circuits. All single throw models can be ordered with the international inscriptions for ON and OFF. These can be specified in vertical or horizontal orientation to accommodate any panel placement needs. JW devices include an integral rocker cap available in color options of black, gray, ivory or red. Housings can be specified in black, gray or ivory.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.