Corp. has reformulated and reintroduced Loctite 243 Threadlocker to
withstand temperatures up to 360F, cure consistently without primers and
tolerate contamination from thread lubrication, anti-corrosion and protection
fluids. Designed for locking and sealing fasteners that may need to be
disassembled during their service life, this anaerobic threadlocker now
provides enhanced performance on both active and passive metal surfaces
including steel, stainless steel and plated materials.
Medium viscosity Loctite 243 prevents loosening and
leakage from shock and vibration on fasteners from 1/4 to Â¾ inch in diameter. This thixotropic liquid threadlocker will not migrate
once applied to a fastener's surface. Loctite 243 fixtures in 5 minutes and
achieves full cure in 24 hours when confined in the absence of air between
close fitting metal surfaces.
Fasteners assembled using removable-strength Loctite 243
can be disassembled using standard hand tools. This threadlocker is registered
to NSF Category P1, and can be used in and around food processing applications.
Loctite 243 is available in 0.5 ml capsules, 10 ml tubes and 50 ml, 250 ml or 1
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Biomimicry has already found its way into the development of robots and new materials, with researchers studying animals and nature to come up with new innovations. Now thanks to researchers in Boston, biomimicry could even inform the future of electrical networks for next-generation displays.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.