Omega's HHM10, HHM20 and
HHM30 Series are low-cost digital multimeters.
Each model has a GS-Mark EN61010-1 Approval, over-voltage category II
600V dc/V ac; pollution degree. Models: HHM26 and HHM28 have RS-232 Interface.
Logic Probe Tester Models are HHM15, HHM20, HHM23. Temperature Measurement
Models are HHM19, HHM21. All multimeters include free protective rubber
boot with tilt stand, set of safety test leads, 9V alkaline battery, type K
beaded wire thermocouple (temperature models only) and complete operator's
manual. All units have a Stated Accuracy at 23±5C < 75 percent RH,
battery life: 200 hours and dimensions: 192 H x 91 W x 52.5 mm D (7.6 x 3.6 x
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.