Engineering is producing small-diameter
microtubes and profiles made ofKetaSpire
polyetheretherketone (PEEK) resin from Solvay Advanced Polymers LLC for the medical industry. Microtubes
made of KetaSpire PEEK offer greater strength and rigidity than PTFE microtubes
and are easier to work with than those made of stainless steel. They are used
in a range of medical applications including catheters, endoscopic working
channels and laparoscopic instruments. IPE
has produced microtubes made of unfilled KetaSpire KT-820 NT PEEK in sizes of
0.029 OD by 0.016 inch ID (0.74 OD by 0.41mm ID) and 0.077 OD by 0.057 inch ID
(1.96 OD by 1.45 mm ID). The company can make PEEK tubes with up to a 0.25 inch
(6.35 mm) diameter. IPE manufactures
the microtubes on a 1 inch extruder specially designed for high-temperature
materials like PEEK, which process at very high melt temperatures in the range
of 370C (700F). IPE also has the capacity to manufacture PEEK profiles, both
open and hollow, for a wide range of applications.
KetaSpire PEEK is a chemically
resistant plastic and offers strength, fatigue resistance and a continuous-use
temperature of 240C (464F). It can withstand more than 1,000 cycles of steam
sterilization without any significant loss of properties and is also compatible
with other sterilization methods, including ethylene oxide, vaporized hydrogen
peroxide and gamma radiation. Based on biocompatibility testing as defined by
ISO 10993-1, KetaSpire PEEK demonstrates no evidence of cytotoxicity,
sensitization, intracutaneous reactivity or systemic toxicity.
Truchard will be presented the award at the 2014 Golden Mousetrap Awards ceremony during the co-located events Pacific Design & Manufacturing, MD&M West, WestPack, PLASTEC West, Electronics West, ATX West, and AeroCon.
In a bid to boost the viability of lithium-based electric car batteries, a team at Lawrence Berkeley National Laboratory has developed a chemistry that could possibly double an EV’s driving range while cutting its battery cost in half.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.