The medical device industry may be on the verge of creating
Band-Aid™-sized wearable devices capable of performing electrocardiograms (ECGs)
and monitoring blood pressure, respiration and body temperature.
at the Medical Design
& Manufacturing West conference held in Anaheim, CA this week, introduced
ECG-on-a-chip technology and said other chip-based medical measurements are
already possible. Several electronics companies at the show also said they're
working with medical device manufacturers on developing over-the-counter
products that could use the technology and be available in the next 12-18
what people are looking for," said Patrick O'Doherty, vice president of the
Healthcare Segment for Analog Devices Inc. "This technology will be clipped on
peoples' belts and go inside Band-Aids."
MD&D show, Analog Devices rolled out the ADAS1000
ECG analog front end, which reduces a conventional 4 x 6 inch ECG printed
circuit board containing 50 components into a single silicon chip. Similarly, Belgium-based
Imec showed off its ECG chip,
which is already being employed in the company's ECG necklace. Those two
companies were joined by Texas Instruments, which rolled out its ECG-capable
analog front end last year.
The new breed of ECG chips is expected to
enable development of products that are radically different from anything
that's been available previously. With the chips, engineers expect to be able
to incorporate ECG capabilities in a small stickable bandage containing an ECG
chip, a wireless transceiver and four or five electrodes. Such products would
eliminate the jumble of criss-crossed wires often associated with ECGs because
they would send their information wirelessly.
get an electrocardiogram won't need to be wrapped up in leads anymore,"
technology receives widespread adoption, it would also open the door to a
multitude of other possibilities. Temperatures, for example, could be taken by stickable
bandages. The same would hold for blood pressure measurements, pacemaker pulse
detection and respiration. The technology might also be used to alert
individuals whose hearts have gone into atrial fibrillation.
As yet, no Band-Aid-sized
ECGs have been deployed in the marketplace. For an entire system, engineers
need to add a wireless transceiver, microcontroller or DSP (digital signal
processor), and associated analog components. ADI engineers said, however, that
medical OEMs are working on the bandage-sized technology today, and such
products could be introduced soon.
raises the bar," said Tony Zarola, strategic marketing manager for ADI's
Healthcare Segment. "It definitely gives us a line of sight to a deployable system."
Imagine being able to monitor your EEG and email the result directly to your doctor. This is MUCH faster and more effieient than today where you go to your doctor, wait in the office, wait again in the examining room, talk to the doctor, and finally, get the EEG done. And the wearable EEG could provide data 24/7, unlike the doctor visit EEG.
Innovations like this will pave the way to more convenient and efficient health care delivery, while at the same time lowering costs. Products like this are a better answer to the high cost of health care than bloated solutions managed by bearucrats the government wants to provide.
Great minaturization application that will make a positive impact. I can also see this for monitoring sports atheletes during their workouts and reporting data in real time. This might also be useful too for neo-natal applications to help prevent sudden crib death.
What makes this movie stand out from the typical high school sports story is that the teenagers are undocumented immigrants, and the big game is a NASA-sponsored marine robotics competition. Like many other Hollywood movies, however, Spare Parts only tells part of the story. What the film shows -- and doesn’t show -- raises important issues affecting STEM education in the US.
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Load dump occurs when a discharged battery is disconnected while the alternator is generating current and other loads remain on the alternator circuit. If left alone, the electrical spikes and transients will be transmitted along the power line, leading to malfunctions in individual electronics/sensors or permanent damage to the vehicle’s electronic system. Bottom line: An uncontrolled load dump threatens the overall safety and reliability of the vehicle.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.