08 Series of Inductive Sensors are for limited space distance measurement
and positioning applications involving metal targets. The sensors measure 4.7 x
8 x 16 mm and have resolutions of <0.001 mm at sensing distances up to 2 mm
and offer high linearity and repeat accuracy.
08 Series sensors feature an integrated 0 to 10V output to allow them to be
directly connected to the analog outputs of a control system and eliminates the
need for measuring boards or processing units. These IP67-rated sensors are
contained in a die-cast zinc/nickel-plated housing to prevent damage during
installation and operation.
IWFM 08 Series Inductive Sensors are designed for use in factory
automation and assembly/handling applications including:
solar cell/PV manufacturing
These sensors are also useful in highly precise end use
applications such as:
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.