Safety Laser Scanner uses pulses of Class 1 infrared laser light
to locate the position of objects in its field of view, effectively protecting
personnel by safeguarding both stationary and mobile hazards within a
The AG4 safeguards irregularly-shaped areas not suitable for a
standard two-or three-piece safety light screen. It is also a replacement
solution for high-maintenance safety mats that are routinely damaged by
repetitive operation or adverse environments. By meeting all requirements for
Type 3 per IEC 61496-1/-2, Category 3 PLd per EN ISO 13849-1, and Safety
Integrity Level (SIL) 2 per IEC 61508, the AG4 performs in applications
including area guarding, access/perimeter guarding and automated guided vehicle
(AGV) collision avoidance.
The AG4 Safety
Laser Scanner operates through the principle of diffuse
reflectance (reflected light) to determine an object's position via range
(measured distance) and rotational angle. Once the AG4 protective and warning
fields are configured, the position of the objects within the field of view are
evaluated. If any are within a protective field, a safety stop signal is
generated from the scanner. The AG4 can additionally be configured so that an
intrusion in the warning field triggers an auxiliary output. This may be used
to slow a mobile vehicle, flash a light, or initiate other actions to warn an
individual who enters this field.
With a 0.36 degree lateral resolution, the AG4
detects objects in a zone up to 190 degrees from its fixed position. The AG4
provides selectable protection field resolution of 30, 40, 50, 70 and 150 mm
with ranges up to 6.25 m, while its warning field provides coverage of up to 15
m. Advanced configuration capabilities allow operators to configure the AG4
with eight individual protective and warning fields. Users can quickly switch
between configured field pairs, providing the flexibility to effectively
protect personnel and equipment in diverse applications.
Key features of the AG4 Safety Laser Scanner include:
Highly flexible protective and warning fields
can be set to match the shape of the work area
Simple installation and easy-to-use software
Five LED diagnostic display presents system
status and diagnostics of devices without connecting to a PC
Eight individual protective and warning field
pairs can be configured
Configurable response time from 80 to 640 msec
RS-232 and RS-422 PC interface connection; USB
System meets all requirements for Type 3 per
IEC 61496-1/-2, Category 3 PLd per EN ISO 13849-1, and Safety Integrity Level
(SIL) 2 per IEC 61508
Two solid-state OSSD safety outputs (250 mA)
and two solid-state auxiliary outputs (100 mA)
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.