Lenze Americas' OKS coatings can be applied to the motor and/or
components depending upon the degree of protection required in the end-user
application. OKS-G (primed) and OKS-S (standard paint) coatings provide
protection in indoor installations in heated rooms with air humidity up to 90
percent. The OKS-M application-optimized paint is for use in indoor
installations in unheated rooms or in a protected outdoor installation with air
humidity up to 95 percent. The OKS-L paint will withstand outdoor installation
and air humidity exceeding 95 percent.
Tested in accordance with DIN 50017 (Condensation Water) and
DIN 50021 (Salt-Spray), the OKS surface coatings exhibited 240 - 400 hour
durability in condensation tests and 150 - 200 hour durability in salt-spray
The FDA has just released draft guidelines for using 3D printing in the design, development, and manufacture of regulated medical products. Although the recommendations are non-binding, they do set some much-needed parameters.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.