Lenze Americas' OKS coatings can be applied to the motor and/or
components depending upon the degree of protection required in the end-user
application. OKS-G (primed) and OKS-S (standard paint) coatings provide
protection in indoor installations in heated rooms with air humidity up to 90
percent. The OKS-M application-optimized paint is for use in indoor
installations in unheated rooms or in a protected outdoor installation with air
humidity up to 95 percent. The OKS-L paint will withstand outdoor installation
and air humidity exceeding 95 percent.
Tested in accordance with DIN 50017 (Condensation Water) and
DIN 50021 (Salt-Spray), the OKS surface coatings exhibited 240 - 400 hour
durability in condensation tests and 150 - 200 hour durability in salt-spray
The new composites manufacturing innovation center is intended to be a source of grand challenges for industry, like the kind that got us to the moon under JFK. These aren't the words its new CEO Craig Blue used, but that's the idea and the vision behind the Institute for Advanced Composites Manufacturing Innovation (IACMI).
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.