Galil Motion Control's
is the latest product in Galil's Econo series. The new product offers many
enhancements compared to the prior Econo controllers including Ethernet
100Base-T, a USB 2.0 port, higher speed performance, larger program memory,
analog inputs and optically isolated I/O.
DMC-41x3 operates stand-alone or interfaces to a PC with Ethernet 10/100Base-T
or USB. An auxiliary RS232 port is also provided. The product is available in
one through eight axis formats, and each axis is user-configurable for stepper
or servo motor operation. The controller can be connected with external drives
of any power range or with Galil's multi-axis (500W per axis) servo drives or
60V, 3A microstepping drives. Galil drives install directly onto the DMC-41x3 controller.
I/O of the DMC-41x3 controller includes 16 optically isolated inputs and
outputs for the 1-4 axis models and 32 I/O
for the 5-8 axis models. Eight analog
inputs are provided in addition to optically isolated forward and reverse
limits and a home input for each axis. Other controller features include PID
compensation with velocity and acceleration feedforward, memory for user
programs, multitasking for simultaneously running up to eight programs, and I/O
processing for synchronizing motion with external events. Modes of motion
include point-to-point positioning, position tracking, jogging, linear and circular
interpolation, contouring, electronic gearing, ECAM and PVT.
DMC-41x3 controller and drive
package is 8.1 x 7.25 x 1.5 inch for the 1- thru 4-axis model and 11.5 x 7.25 x
1.5 inch for the 5- thru 8- axis model. It accepts power from a single 20-60V
dc source. The DMC-41x3 is
available as a card-level product or packaged in a metal enclosure.
all Galil controllers the DMC-41x3
controllers are programmed with Galil's intuitive, 2-letter command language.
for the 4-axis DMC-4143 controller
is $1,495 in quantity 1 and $995 in quantity 100.
Parallax Inc. is known for developing the Basic Stamp microcontroller development board and educational accessory kits. In addition to developing a user-friendly educational platform to learn about 8-bit microcontrollers and software programming, it created a multicore 32-bit chip called the Propeller.
Researchers working with additive manufacturing have said multimaterial techniques will allow industry “to fabricate materials with combinations of density, strength, and thermal expansion that do not exist [yet].”
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.