Using Rexroth's non-contact Transfer units (NCT), the End Effector creates a dynamic lifting force using positive airflow (Bernoulli principle) to handle solar photovoltaic wafers without requiring a physical seal with their surface. This means that handling and transporting delicate solar wafers, a process previously achieved only by manual labor, can be automated.
The low pressure in the NCT provides a lifting force, similar to a vacuum suction cup. To prevent the wafer from contacting the End Effector, even if the wafer is warped, a complete vacuum seal is not desirable. Therefore, the NCT allows enough air to escape to create a gap between the wafer and the End Effector. Integrated edge guides (gripper flaps) align and constrain the wafer during transport for safe handling.
The End Effector can be integrated with SCARA, 6-axis, or Cartesian robots. A wafer presence sensor provides constant detection and feedback, allowing the robot to activate the End Effector when the wafer is detected.
The Non-Contact End Effector is available for standard 156 mm polycrystalline and multi-crystalline solar cells, and can reliably handle and transport wafers with 50-300 ΅m thickness, according to Rexroth.
See other Design News solar photovoltaic coverage:
More often than not, with the purchase of a sports car comes the sacrifice of any sort of utility. In other words, you can forget about a large trunk, extra seats for the kids, and more importantly driving in snowy (or inclement) weather. But what if there was a vehicle that offered the best of both worlds; great handling and practicality?
Science fiction author Isaac Asimov may have the best rules for effective brainstorming and creativity. His never-before-published essay, "On Creativity," recently made it to the Web pages of MIT Technology Review.
Much has been made over the potentially dangerous flammability of lithium-ion batteries after major companies like Boeing, Sony, and Tesla have grappled with well-publicized battery fires. Researchers at Stanford University may have come up with a solution to this problem with a smart sensor for lithium-ion batteries that provides a warning if the battery is about to overheat or catch fire.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.