The Army has cleared the way for
ocean-based clean energy and water. The U.S. Army Corps of Engineers has given
a Section 10 Permit to Renew Blue Inc. subsidiary Independent Natural Resources
Inc. (INRI) to install a commercial wave-powered demonstration facility. The
energy-producing facility is designed to turn waves into electricity while also
producing fresh, desalinated water.
This is the first instance of a
Section 10 Permit issued to demonstrate a commercial wave-energy facility.
"This permit marks a significant step to help Texas achieve its goals for new
sources of energy and clean water," says Douglas Sandberg, vice president of
INRI.
Traditional desalination
facilities require substantial amounts of electricity. INRI's Seadog Pump is
powered solely by electricity developed by wave energy. Since 40 to 50 percent
of operating costs in the desalination process are attributed to energy, the
self-energy-generating Seadog offers a low-cost solution for producing fresh
water.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
