PennEngineering's new PEM® micro self-clinching standoff
fasteners can serve as practical, cost-effective, and permanently secure
solutions enabling quicker assembly of devices ranging from hand-held consumer
electronics to medical equipment, among others.
PEM Type MSO4™ micro
self-clinching standoffs are manufactured from 400 Series stainless steel and
are engineered with threads as small as M1.0 / #00 and in lengths as short as 2
mm / .080 inch. They can be installed into sheet metal (including 300 Series
stainless steel) as thin as 0.4 mm / .016 inch with maximum hardness up to HRB
88 on the Rockwell "B" scale.
The micro standoffs clinch permanently
into place by pressing them into a properly sized mounting hole using a punch
and anvil until the fastener's head is flush with the sheet. Upon installation,
they become a permanent part of an assembly, will not loosen or fall out, and
provide strong and reusable load-bearing threads. Installing them automatically
can further reduce costs by accelerating production and eliminating any need to
handle the small parts.
The new composites manufacturing innovation center is intended to be a source of grand challenges for industry, like the kind that got us to the moon under JFK. These aren't the words its new CEO Craig Blue used, but that's the idea and the vision behind the Institute for Advanced Composites Manufacturing Innovation (IACMI).
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.