Inc. accelerated its commitment to wireless recently, rolling out new
transceiver modules, development boards and application interfaces (APIs) that
could make it easier for machines to talk to one another.
products are a response to the growing need among engineers to add wireless
communications to their designs.
"Wireless in the embedded space is
becoming more cost effective and a more viable means of communications," said Tyler
Smith, marketing manager for the RF Products Div. at Microchip. "We're seeing a
lot of engineers who view wireless as being critical to their designs."
Microchip announced at the recent
Embedded Systems Conference-Chicago that it is rolling out a pair of Wi-Fi
transceiver modules, known as the MRF24WB0MA
The modules' firmware includes an API driver interface to Microchip's TCP/IP
protocol stack, as well as to its 8-, 16-, and 32-bit PIC microcontrollers.
"The API allows the user to add
features to the TCP/IP stack," Smith said.
Along with the Wi-Fi module,
Microchip also said it will offer development hardware, known as the MRF24WB0MA
Plus Daughter Board.
Microchip said it is targeting the
products at applications ranging from remote monitoring and control to energy
monitors and machine-to-machine applications.
Keeping with its growing emphasis
on wireless, Microchip also said it is rolling out a low-power-consumption
transceiver for sub-GHz applications. Known as the MRF89XA,
the new transceiver is targeted at 868, 915 and 950 MHz wireless networks.
Smith said the new sub-GHz unit would be targeted at meter readers, industrial
automation systems, remote keyless entry, tire pressure monitoring and
A new method of modeling how they are created with chemical vapor deposition (CVD) could reduce the cost of carbon nanostructures used for for research and commercial applications, including advanced sensors and batteries.
BMW has already incorporated more than 10,000 3D-printed parts in the Rolls-Royce Phantom and intends to expand the use of 3D printing in its cars even more in the future. Meanwhile, Daimler has started using additive manufacturing for producing spare parts in Mercedes-Benz Trucks.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.