ARi Industries Inc.
announced immediate availability of its AerOpak
mineral-insulated (MI) thermocouple cable in an expanded assortment of sizes
and sheath materials. MI cable offers thermocouple fabricators, instruments
designers, process engineers and various equipment builders a unique solution
to the challenges of temperature measurement and electrical signal-sending in
harsh, corrosive and other hazardous environments.
Offered as thermocouple and conductor cable, AerOpak
products comprise thermocouple or conductor wires insulated with compacted
ceramic powder, drawn and encased in a seamless metallic sheath material. Standard
thermocouple or conductor cables up to 10-wire configurations are available in
various stainless steel, Hastelloy and Inconel sheath materials in OD sizes
ranging from 0.020 to 0.750 inch diameter. Cable can be supplied for
temperatures up to metal melt points of 2600F and over 1000 ft in length,
making these products suitable for all types of process operations and very
large equipment. Owing to the strict manufacturing and production standards of
ARi, MI cable signal integrity is consistent over the longest length
Thermocouple cables in Types K, E, J, T, N, R, S, and B are
stocked in calibration tolerances to meet all applicable ASTM, IEC and ANSI
MI cable from ARi can be welded, brazed or soldered in the
field, relative to the application and techniques used. Please consult the
manufacturer for details or installation assistance. Custom wire
configurations, other sheath materials and assorted insulation ingredients are
also available on request, to suit virtually all applications.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.