Sandvik has developed two new precoated metal strip steels that are
intended to boost productivity and reduce environmental constraints associated
with plating and coating.
"Our diverse stainless steels can
be coated with several layers of metals like nickel, tin, silver or similar,
which increases product performance through high surface conductivity,
corrosion protection and wear resistance," says Jeremy Gaspard, marketing
specialist – Americas for Sandvik, referring to a new grade for electronic
applications called Santronic.
By combining an advanced vacuum process with nanotechnology, Sandvik
says it can produce strip steel with consistent coating layers as thin as 20
Another product line, called Sandvik Decorex, features a range of
colored stainless steels that were developed for decorative parts for
appliances, consumer electronics, packaging and automotive.
Sandvik says that Decorex strip can be cold formed and bent to close
radii without affecting the color quality due to excellent adhesion between the
base material and the coating.
The precoated strips are more expensive than noncoated stainless steels,
but Sandvik would not provide any examples of pricing.
"Generally, our clients have a total savings of 15 to 30 percent over
traditional processes," says Gaspard. "This is based on their current supply chain
and manufacturing process."
Decorex is generally supplied on 304 stainless steel substrate for
formability purposes. First the customer selects a thickness, texture and
width. Then Sandvik produces the customer color choice using its technology
coating process, which is similar to but more advanced then commonly used PVD
(physical vapor deposition) processes.
Santronic is generally supplied on 301 SS substrate for tensile strength
and fatigue resistance purposes. The buying process also starts with a customer
selecting a thickness and width. Then Sandvik produces the coatings on one or
two sides of the base material using its technology coating process.
Prices depend on the color, the texture, the thickness, the width and
The energy consumed to produce one square meter of Santronic or Decorex
is 1.264 kWh, says Sandvik. Other processes consume far more energy, according to Sandvik.
A bold, gold, open-air coupe may not be the ticket to automotive nirvana for every consumer, but Lexus’ LF-C2 concept car certainly turned heads at the recent Los Angeles Auto Show. What’s more, it may provide a glimpse of the luxury automaker’s future.
The complexity of diesel engines means optimizing their performance requires a large amount of experimentation. Computational fluid dynamics (CFD) is a very useful and intuitive tool in this, and cold flow analysis using CFD is an ideal approach to study the flow characteristics without going into the details of chemical reactions occurring during the combustion.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.