The HNH Series pneumatic grippers can grip objects weighing up to 2.5 lb. The grippers are available for angular and parallel operation; in double- or single-acting types; in four bore sizes: 3/8, 5/8, 3/4, and 1 inch. Maximum repeatability is 180 cycles/min. Grippers come with a piston magnet, ready to use with LED Hall-effect sensor switches. No internal lubrication is required, and the grippers can be mounted axially from the rear, or from two different sides.
The Industrial Internet of Things may be going off the deep end in connecting everything on the plant floor. Some machines, bearings, or conveyors simply donít need to be monitored -- even if they can be.
Wind turbines already are imposing structures that stretch high into the sky, but an engineering graduate student at the University of Notre Dame wants to make them even taller to reduce energy costs and improve efficiency.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.