Motor control module
The CMI-5015-28 motor control module, specifically designed for operating both fractional and integral horsepower motors, operates from a single input supply ranging from 14 to 35V with output capabilities up to 20 amps. It's housed in a metal hermetic package and is applicable to a range of applications including robotics, electromechanical valve assemblies, battery-operated motors, fans and blowers, cryogenic coolers, and low voltage battery operated vehicles.
Composite Modules Inc ., 1 Mill St., Attleboro, MA 02703; FAX (508) 226-0938; www.cmodules.com.
Precision BiSlide Assemblies, for positioning and scanning, have dual 45°opposing "V" ways to provide high rigidity in all directions. The carriage moves on low friction PTFE compound bearings, which are fully adjustable to customize pre-load. The Nylatron™StabilNut™lead screw drive nut is also adjustable. The second pair of "V" ways on the bottom side can be utilized should any damage occur to the top "V" ways.
Velmex , 7550 State Rte 5 & 20, Bloomfield, NY 14469; FAX (716) 657-6153; www.
Ultrasert®Mounted Spherical Bearings are designed to provide maintenance free operation, high chemical and temperature resistance, and extreme load carrying capability. Recommended uses include applications in the food and beverage, mineral and coal mining, timber, and steel handling industries. They can be freely interchanged with standard bearings and are available off-the-shelf in several grades and shaft sizes.
Tri-Star Plastics Corp ., 906 Boston Tpke., Shrewsbury, MA 01545; FAX (508) 845-1200; www.tstar.com.
The MCNB Series spring applied brake incorporates a plastic armature, which significantly reduces the inertia that servomotors need to accelerate. This new, engineered plastic armature has friction material bonded directly to the surface. This material, designed to resist glazing, allows the brake to maintain a more consistent coefficient of friction over a wider temperature range. This allows the brake to have more consistent torque in high temperature servomotor applications.
Ogura Industrial Corp ., 400 Cottontail Lane, Box 5790, Somerset, NJ 08875-5790; FAX (732) 271-7580; www.ogura-
This that its line of rolling ring linear actuators now offers users the ability to double axial thrust (up to 800 lbs. for some models) without going to a large size actuator. They achieve the doubling of axial thrust by adding an additional rolling ring bearing inside the actuator. The extra ring option eliminates the need to redesign to accommodate a larger drive shaft sized actuator and also saves on the associated costs.
Amacoil , 2100 Bridgewater Rd. Box 2228, Aston, PA 19014; FAX 610-485-2357; www.amacoil.com.
This Ball Screw Jack features a ball nut with integral ball bearings that re-circulate along the surface of the ball screw. The reduced friction between the ball nut and screw results in greater efficiency. Compared to machine screw jacks, ball screw jacks reportedly require less motor horsepower, allow high screw speed, and provide an extended duty cycle.
Joyce/Dayton Corp. , 3400 Office Park Dr. Box 1630, Dayton, OH 45401; FAX (937) 297-7173; www.joycedayton.com.
This new Series 300 RAO interchange heavy-duty ball bearing incorporates double lip contact seals, Cam-Lock mounting, and other features to be well suited for agricultural, textile, and many other high capacity or high speed applications. They are designed as an exact interchange for other popular bearings used in these applications. The double lip contact seal is held securely by a snap ring, which prevents blowout during lubrication.
Rexnord Corp. , 7601 Rockville Rd., Indianapolis, IN 46206; www.rexnord.com.
The ULTRA™high-speed super precision bearing reportedly combines high speed capabilities with low internal heat generation while maintaining the precision, accuracy, and high surface finish of precision machined parts. With dimensions to ISO series 10, the ULTRA is dimensionally interchangeable with standard super precision bearings and, as a result, existing main spindle bearings can be easily replaced for higher speed capability.
NSK Corp. , 3861 Research Park Dr. Box 1507, Ann Arbor, MI 48106-1507; www.nsk-corp.com.
AML®is claimed to be the world's first software-only motion controller and it is now available for the SMS-10 Stand-alone Controller, which includes the SERCOS interface, an Ethernet (TCP/IP) port, dual serial ports, a master encoder input with latch, digital I/O, a solid-state flash disk, and two PCMCIA slots for options DeviceNet or ProfiBus DP connectivity. VxWorks is used for running the AML application program.
Automation Intelligence , 2455 MeadowBrook Pkwy., Duluth, GA 30096-4636; FAX (770) 497-8666; www.motiononline.com.
Combining a controller, amplifier, encoder, and motor in one compact package, the RC-0411 is designed for OEMs as well as manufacturing systems. Intended industries include pharmaceutical, semiconductor, printing, and security. By incorporating TermiBus into the system, the RC-0411 has unified control of mix-and-match brushless and stepping motors. It features a maximum speed of 4,500 rpm and has a rated output of 80W.
Star Micronics , 70 Ethel Rd. West, Piscataway, NJ 08854; FAX (732) 572-5095; www.starmicronics.com.
Size 23 slotted brushless dc motor (2.3-inch diameter) with high-energy bonded neo-dymium magnets is available in 0.5- and 1-inch stack lengths that provide continuous torque output up to 32 oz-inches. The motor delivers speeds up to 8,000 rpm with maximum power output of 107W. A mounting configuration consistent with NEMA 23 standards and a modular design facilitate motor customization with shaft modifications, special winding, and optical encoders to meet unique application demands. Applications range from medical diagnostic devices to computer peripherals and mass storage and office automation equipment.
Pittman , 343 Godshall Drive, Harleysville, PA 19438; FAX (215) 256-1338; www.pittmannet.com.
The AMLOK®Type RCN air-actuated Power-Off Rod Clamps were developed as a solution to control problems such as travel, drifting, bouncing, and reverse traveling. It is available as a stand-alone unit and can be mounted to a pneumatic NFPA or ISO cylinder of choice, or can be used with no cylinder at all.
Advanced Machine & Engineering Co ., 2500 Latham St., Rockford, IL 61103; FAX (815) 964-1446; www.ame.com.
GOLDLINE XT series brushless servo motor offers a range of torque ratings, frame sizes, and speeds in a ruggedized package. The XT 30 model has continuous torque ratings from 1.3 to 5.0 N-m (1.0 to 3.7 lb-ft) and speeds up to 6,000 rpm. Using a proprietary magnet design, the motor's high torque-to-inertia ratio delivers rapid acceleration. Features include encoder feedback, NEMA 34 and 100 mountings, and built-in thermostat. Options include IP-65 and IP-67 sealing, integral brake, and resolver feedback. Typical applications include converting, packaging, semiconductor processing, and factory automation.
Kollmorgen Motion Technologies , 201 Rock Rd., Radford, VA 24141; FAX 540-731-0847; www.kollmorgen.com.