This new series of RMS current transducers offer accuracy over a 20Hz-2KHz range. Available in 14 current ranges from 2A to 250A, they have an accuracy of 0.25 percent over a temperature range of -40 to 85C (-40 to 185F). They also have a wide voltage power range from 12V to 32V, and a current signal from 4mAdc to 20mAdc. They protect against reverse polarity and overload currents of up to 500A, plus a load resistance range from 0 to 300. They have an epoxy coating on the internal circuitry for insulation and protection from moisture and contaminants. They come built into a molded plastic, 94V-O flammability-rated case. Storage temperature is -55 to 125C (-67 to 257F)They also come with a five-terminal barrier and a 0.75-inch pass-through hole. A six-pin connector and nine-pin D-Sub connector are also available.
Digital healthcare devices and wearable electronic products need to be thoroughly tested, lest they live short, ignominious lives, an expert will tell attendees at UBM’s upcoming Designers of Things conference in San Jose, Calif.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.