The TH72016 transmitter works in virtually any FSK, ASK, or FM system in the 380 to 450 MHz unlicensed Industrial-Scientific-Medical (ISM) and Short-Range-Devices (SRD) frequency bands. Its extended operating temperature range of -40 to +125C and clock output to drive a microcontroller make it ideal for automotive applications such as Tire Pressure Monitoring Sytems (TPMS) or Remote Keyless Entry (RKE) that require enhanced data timing. The TH72016 comes in a space-saving 10-pin Quad Flat No-lead (QFN) package with a footprint of only 3 x 3 mm. The TH72016 IC accepts battery voltages from 1.9 to 5.5 V. Power consumption ranges from 3.5 to 12.8 mA depending on the frequency and power setting. In standby mode the current consumption is below 50 nA. The programmable RF transmit power range between -12 to 10 dBm allows the designer to adapt to his RF power requirements. Melexis http://rbi.ims.ca/4912-548
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.